Tim, Grant
here are some more information.
I think there is a also a problem with memory after FEC crasched.
[EMAIL PROTECTED]:~ free
total used free shared buffers
Mem: 127100 26424 100676 0 432
Swap: 0 0 0
Total: 127100 26424 100676
[EMAIL PROTECTED]:~
[EMAIL PROTECTED]:~
[EMAIL PROTECTED]:~ ifdown eth0
net eth0: queues didn't drain
net eth0: tx: index: 10, outdex: 6
net eth0: rx: index: 117, outdex: 118
[EMAIL PROTECTED]:~ ifup eth0
net eth0: attached phy 0 to driver Generic PHY
[EMAIL PROTECTED]:~ freePHY: f0003000:00 - Link is Up - 100/Full
[EMAIL PROTECTED]:~ free
total used free shared buffers
Mem: 127100 35028 92072 0 760
Swap: 0 0 0
Total: 127100 35028 92072
Cheers
Mit freundlichen Grüßen
Hans Lehmann
Softwareentwicklung
Telefon +49 (0)2191-67-2520
Fax +49 (0)2191-67-703408
e-mail [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]>
Ritter Elektronik GmbH
Leverkuser Straße 65
D-42897 Remscheid
www.ritter-elektronik.de <http://www.ritter-elektronik.de/start.html>
Geschäftsführer: Manfred A. Wagner, Dr. Uwe Baader
Sitz der Gesellschaft: Oberhausen
HRB 17168 Duisburg / USt-ID DE 814009849
________________________________
Von: Matt Sealey [mailto:[EMAIL PROTECTED]
Gesendet: Dienstag, 25. November 2008 16:19
An: Lehmann, Hans (Ritter Elektronik)
Cc: Tim Yamin; Grant Likely; linuxppc-dev@ozlabs.org
Betreff: Re: [PATCH]: [MPC5200] Add ATA DMA support
On Tue, Nov 25, 2008 at 8:45 AM, Lehmann, Hans (Ritter Elektronik) <[EMAIL
PROTECTED]> wrote:
Tim, Grant,
just an info.
Very often the Bestcomm-FEC crashed without any error logs if I
initiate a transaction over FEC and save the file to disk (I rememeber I have
read something like that). A restart of FEC don't work.
But no I figured out, if I connect to the other ethernet port of our
board (natsemi) the FEC will awake to life again, if I initiate a new
transaction over natsemi. This seems a little oddly to me.
Hi guys,
We tried to get the SUSE guys to push the patch into openSUSE 11.1 release and
the tests came back negative here too with regards to FEC support; for some odd
reason, it does this;
https://bugzilla.novell.com/show_bug.cgi?id=445856#c10
There is some weird interaction here, but I can't imagine what it might be.
Tim, did you ever see any ethernet problems like this?
--
Matt Sealey <[EMAIL PROTECTED]>
Genesi, Manager, Developer Relations
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
