On Fri, Oct 17, 2008 at 12:57 PM, Anton Vorontsov
<[EMAIL PROTECTED]> wrote:
> MCU is an external Freescale MC9S08QG8 microcontroller, mainly used to
> provide soft power-off function, but also exports two GPIOs (wired to
> the LEDs and also available from the external headers).
>
> Signed-off-by: Anton Vorontsov <[EMAIL PROTECTED]>
Kumar, I think you merged this patch incorrectly ...
> diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts
> b/arch/powerpc/boot/dts/mpc8349emitx.dts
> index 7fc5414..4bdbaf4 100644
> --- a/arch/powerpc/boot/dts/mpc8349emitx.dts
> +++ b/arch/powerpc/boot/dts/mpc8349emitx.dts
> @@ -91,6 +91,14 @@
> interrupts = <18 0x8>;
> interrupt-parent = <&ipic>;
> };
> +
> + mcu_pio: [EMAIL PROTECTED] {
> + #gpio-cells = <2>;
> + compatible = "fsl,mc9s08qg8-mpc8349emitx",
> + "fsl,mcu-mpc8349emitx";
> + reg = <0x0a>;
> + gpio-controller;
> + };
This node is supposed to go under the I2C node, but you put it under
the DMA node.
--
Timur Tabi
Linux kernel developer at Freescale
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
