On Feb 2, 2009, at 3:36 AM, Martyn Welch wrote:
Becky Bruce wrote:
On Jan 30, 2009, at 8:42 AM, Kumar Gala wrote:
On Jan 30, 2009, at 6:31 AM, Martyn Welch wrote:
Hi Guys,
It seems that 2.6.29-rc3 is not booting on the MPC8641 HPCN. I
have just updated u-boot to the latest git to see if that
improved matters, however I get stuck at the following. Any ideas?
did you update your .dtb as well?
Yup, just double checked it. SOC mapped at ffe00000. If I use the
wrong DTB I don't get any serial output...
We've changed the memory map for that board in the latest u-boot,
which is why you need a new .dtb. If this still failing, let me
know, and I'll give it a try on my board and see what's up since
this is probably my fault :)
It appears the same problem is affecting our sbc610 as well, the
location of the SOC hasn't changed on that board.
Martyn
Hm.. maybe try a git-bisect between 2.6.28 and 2.6.29-rc3?
- k
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
