On Thu, Feb 12, 2009 at 12:10:58PM +0100, Jean-Michel Hautbois wrote:
> 2009/2/12 Pieter <phenn...@vastech.co.za>
>
> > Jean-Michel Hautbois wrote:
> > > Warning (reg_format): "reg" property in
> > > /local...@f0010100/fl...@0,0/partit...@ff800000 has invalid length (8
> > > JM
> > You are missing some definitions, The #address-cells and #size-cells = <1>;
> > tis is a snippet of teh dts i defined for my board.
> >
> > fl...@0,0 {
> > #address-cells = <1>;
> > #size-cells = <1>;
> > compatible = "cfi-flash";
> > reg = <0x0 0x0 0x08000000>;
> > bank-width = <4>;
> > device-width = <1>;
> >
> > /* set flash partition to correspond tu mtd parts in
> > u-boot*/
> > /* 0xf8000000 */
> > partit...@0x0 {
> > label = "factory-image";
> > reg = <0x00000000 0x01000000>;
> > };
> > /* 0xf9000000 */
> > partit...@0x01000000 {
> > label = "app-image-1";
> > reg = <0x01000000 0x01000000>;
> > };
> > cheers pieter
> >
>
> Hi do have these definitions, at a higher level:
The address-cells and size-cells definitions are not inherited. They
cover only the immediate children of the node where they appear.
Otherwise the default values apply (address-cells == 2, size-cells ==
1), which are not right for your case.
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
