Probably better would be to check the board file for mpc834x_mds.c I mean just cross that you probe all the buses which are on the device. What is fsl,pq2pro-localbus? Do u have such node in dts as the mpc8349_itx has.
> -----Original Message----- > From: pku....@gmail.com [mailto:pku....@gmail.com] On Behalf > Of Li Yang-R58472 > Sent: Thursday, February 19, 2009 12:50 PM > To: Dushara Jayasinghe > Cc: linuxppc-dev@ozlabs.org; Aggrwal Poonam-B10812 > Subject: Re: Newby trying to get Ethernet going on MPC83xx > series device. > > On Thu, Feb 19, 2009 at 2:58 PM, Dushara Jayasinghe > <dusha...@optiscan.com> wrote: > > That did it. > > > > > > > > I based my board specific file on mpc834x_itx.c which had > > > > > > > > static struct of_device_id __initdata mpc834x_itx_ids[] = { > > > > { .compatible = "fsl,pq2pro-localbus", }, > > > > { .compatible = "simple-bus", }, > > > > {}, > > > > }; > > > > > > > > Don't know if this is broken? > > It's not broken as long as you have compatible = "simple-bus" > for your soc node. > > - Leo > > _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
