On Sun, Mar 1, 2009 at 9:48 AM, Grant Likely <grant.lik...@secretlab.ca> wrote: > On Sun, Mar 1, 2009 at 3:18 AM, Wolfram Sang <w.s...@pengutronix.de> wrote: >> Hi Grant, >> >> thanks for the review! >> >> On Thu, Feb 26, 2009 at 10:31:24PM -0700, Grant Likely wrote: >>> Thanks for the patch Wolfram. Comments below. >>> >>> On Wed, Feb 25, 2009 at 8:32 AM, Wolfram Sang <w.s...@pengutronix.de> wrote: >>> > Signed-off-by: Wolfram Sang <w.s...@pengutronix.de> >>> > --- >>> > arch/powerpc/boot/dts/pcm032.dts | 391 +++++++ >>> > arch/powerpc/configs/52xx/pcm032_defconfig | 1394 >>> > ++++++++++++++++++++++++++ >>> >>> Do you really need a separate defconfig for this board? Can it be >>> merged with an existing defconfig? >> >> Will have a look if I can make a pcm03x_defconfig out of pcm030_defconfig. > > Cool, thanks. > >>> motionpro.dts is a good example of what it should look like. >> >> Ah, thanks for the pointer. Will have a look there. Guess I'll need to update >> pcm030.dts later, too (from which I copied this one). Will rewrite the >> localbus-node addressing the comments you gave. > > pcm030.dts in mainline doesn't have a localbus node.
I've been using this on my pcm030 locally. pcm030 doesn't have a PCI socket but it can be added via the expansion bus. With just the basic pcm030 hardware, if I uncomment the pci node I sometimes hang on boot. l...@ff000000 { compatible = "fsl,lpb", "simple-bus"; #address-cells = <2>; #size-cells = <1>; ranges = <0 0 0xff000000 0x01000000>; fl...@0 { compatible = "cfi-flash"; reg = <0 0 0x01000000>; bank-width = <2>; device-width = <2>; #size-cells = <1>; #address-cells = <1>; partit...@0 { label = "ubootl"; reg = <0x00000000 0x00040000>; }; partit...@40000 { label = "kernel"; reg = <0x00040000 0x001c0000>; }; partit...@200000 { label = "jffs2"; reg = <0x00200000 0x00D00000>; }; partit...@f00000 { label = "uboot"; reg = <0x00f00000 0x00040000>; }; partit...@f40000 { label = "oftree"; reg = <0x00f40000 0x00040000>; }; partit...@f80000 { label = "space"; reg = <0x00f80000 0x00080000>; }; }; }; /* p...@f0000d00 { #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; device_type = "pci"; compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci"; reg = <0xf0000d00 0x100>; interrupt-map-mask = <0xf800 0x0 0x0 0x7>; interrupt-map = <0xc000 0x0 0x0 0x1 &mpc5200_pic 0x0 0x0 0x3 / 1st slot / 0xc000 0x0 0x0 0x2 &mpc5200_pic 0x1 0x1 0x3 0xc000 0x0 0x0 0x3 &mpc5200_pic 0x1 0x2 0x3 0xc000 0x0 0x0 0x4 &mpc5200_pic 0x1 0x3 0x3 0xc800 0x0 0x0 0x1 &mpc5200_pic 0x1 0x1 0x3 / 2nd slot / 0xc800 0x0 0x0 0x2 &mpc5200_pic 0x1 0x2 0x3 0xc800 0x0 0x0 0x3 &mpc5200_pic 0x1 0x3 0x3 0xc800 0x0 0x0 0x4 &mpc5200_pic 0x0 0x0 0x3>; clock-frequency = <0>; // From boot loader interrupts = <0x2 0x8 0x0 0x2 0x9 0x0 0x2 0xa 0x0>; interrupt-parent = <&mpc5200_pic>; bus-range = <0 0>; ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x20000000 0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000 0x01000000 0x0 0x00000000 0xb0000000 0x0 0x01000000>; }; */ > > g. > > -- > Grant Likely, B.Sc., P.Eng. > Secret Lab Technologies Ltd. > _______________________________________________ > Linuxppc-dev mailing list > Linuxppc-dev@ozlabs.org > https://ozlabs.org/mailman/listinfo/linuxppc-dev > -- Jon Smirl jonsm...@gmail.com _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev