RFC, please don't apply yet.
On Wed, Mar 18, 2009 at 11:00 PM, Grant Likely
<grant.lik...@secretlab.ca> wrote:
> From: Grant Likely <grant.lik...@secretlab.ca>
>
> This patch simplifies the driver by making use of more common code.
>
> Signed-off-by: Grant Likely <grant.lik...@secretlab.ca>
> ---
>
> drivers/net/gianfar.c | 94
> ++++++++++++++-------------------------------
> drivers/net/gianfar.h | 3 +
> drivers/net/gianfar_mii.c | 52 +------------------------
> 3 files changed, 34 insertions(+), 115 deletions(-)
>
>
> diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
> index 9831b3f..0521267 100644
> --- a/drivers/net/gianfar.c
> +++ b/drivers/net/gianfar.c
> @@ -75,6 +75,7 @@
> #include <linux/if_vlan.h>
> #include <linux/spinlock.h>
> #include <linux/mm.h>
> +#include <linux/of_mdio.h>
> #include <linux/of_platform.h>
> #include <linux/ip.h>
> #include <linux/tcp.h>
> @@ -155,17 +156,13 @@ static inline int gfar_uses_fcb(struct gfar_private
> *priv)
>
> static int gfar_of_init(struct net_device *dev)
> {
> - struct device_node *phy, *mdio;
> - const unsigned int *id;
> const char *model;
> const char *ctype;
> const void *mac_addr;
> - const phandle *ph;
> u64 addr, size;
> int err = 0;
> struct gfar_private *priv = netdev_priv(dev);
> struct device_node *np = priv->node;
> - char bus_name[MII_BUS_ID_SIZE];
>
> if (!np || !of_device_is_available(np))
> return -ENODEV;
> @@ -228,8 +225,8 @@ static int gfar_of_init(struct net_device *dev)
> if (of_get_property(np, "fsl,magic-packet", NULL))
> priv->device_flags |= FSL_GIANFAR_DEV_HAS_MAGIC_PACKET;
>
> - ph = of_get_property(np, "phy-handle", NULL);
> - if (ph == NULL) {
> + priv->phy_node = of_parse_phandle(np, "phy-device", 0);
> + if (!priv->phy_node) {
> u32 *fixed_link;
>
> fixed_link = (u32 *)of_get_property(np, "fixed-link", NULL);
> @@ -237,57 +234,10 @@ static int gfar_of_init(struct net_device *dev)
> err = -ENODEV;
> goto err_out;
> }
> -
> - snprintf(priv->phy_bus_id, sizeof(priv->phy_bus_id),
> - PHY_ID_FMT, "0", fixed_link[0]);
> - } else {
> - phy = of_find_node_by_phandle(*ph);
> -
> - if (phy == NULL) {
> - err = -ENODEV;
> - goto err_out;
> - }
> -
> - mdio = of_get_parent(phy);
> -
> - id = of_get_property(phy, "reg", NULL);
> -
> - of_node_put(phy);
> - of_node_put(mdio);
> -
> - gfar_mdio_bus_name(bus_name, mdio);
> - snprintf(priv->phy_bus_id, sizeof(priv->phy_bus_id),
> "%s:%02x",
> - bus_name, *id);
> }
>
> /* Find the TBI PHY. If it's not there, we don't support SGMII */
> - ph = of_get_property(np, "tbi-handle", NULL);
> - if (ph) {
> - struct device_node *tbi = of_find_node_by_phandle(*ph);
> - struct of_device *ofdev;
> - struct mii_bus *bus;
> -
> - if (!tbi)
> - return 0;
> -
> - mdio = of_get_parent(tbi);
> - if (!mdio)
> - return 0;
> -
> - ofdev = of_find_device_by_node(mdio);
> -
> - of_node_put(mdio);
> -
> - id = of_get_property(tbi, "reg", NULL);
> - if (!id)
> - return 0;
> -
> - of_node_put(tbi);
> -
> - bus = dev_get_drvdata(&ofdev->dev);
> -
> - priv->tbiphy = bus->phy_map[*id];
> - }
> + priv->tbi_node = of_parse_phandle(np, "tbi-handle", 0);
>
> return 0;
>
> @@ -661,7 +611,6 @@ static int init_phy(struct net_device *dev)
> uint gigabit_support =
> priv->device_flags & FSL_GIANFAR_DEV_HAS_GIGABIT ?
> SUPPORTED_1000baseT_Full : 0;
> - struct phy_device *phydev;
> phy_interface_t interface;
>
> priv->oldlink = 0;
> @@ -670,23 +619,38 @@ static int init_phy(struct net_device *dev)
>
> interface = gfar_get_interface(dev);
>
> - phydev = phy_connect(dev, priv->phy_bus_id, &adjust_link, 0,
> interface);
> + if (priv->phy_node) {
> + priv->phydev = of_phy_connect(dev, priv->phy_node,
> &adjust_link,
> + 0, interface);
> + if (!priv->phydev) {
> + dev_err(&dev->dev, "error: Could not attach to
> PHY\n");
> + return -ENODEV;
> + }
> + }
> +
> + if (priv->tbi_node) {
> + priv->tbiphy = of_phy_connect(dev, priv->tbi_node,
> &adjust_link,
> + 0, interface);
> + if (!priv->tbiphy) {
> + dev_err(&dev->dev, "error: Could not attach to
> TBI\n");
> + goto err_tbiphy;
> + }
> + }
>
> if (interface == PHY_INTERFACE_MODE_SGMII)
> gfar_configure_serdes(dev);
>
> - if (IS_ERR(phydev)) {
> - printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
> - return PTR_ERR(phydev);
> - }
> -
> /* Remove any features not supported by the controller */
> - phydev->supported &= (GFAR_SUPPORTED | gigabit_support);
> - phydev->advertising = phydev->supported;
> -
> - priv->phydev = phydev;
> + priv->phydev->supported &= (GFAR_SUPPORTED | gigabit_support);
> + priv->phydev->advertising = priv->phydev->supported;
>
> return 0;
> +
> + err_tbiphy:
> + if (priv->phy_node)
> + phy_disconnect(priv->phydev);
> + priv->phydev = NULL;
> + return -ENODEV;
> }
>
> /*
> diff --git a/drivers/net/gianfar.h b/drivers/net/gianfar.h
> index eaa8689..d3d56a9 100644
> --- a/drivers/net/gianfar.h
> +++ b/drivers/net/gianfar.h
> @@ -775,7 +775,8 @@ struct gfar_private {
> spinlock_t bflock;
>
> phy_interface_t interface;
> - char phy_bus_id[BUS_ID_SIZE];
> + struct device_node *phy_node;
> + struct device_node *tbi_node;
> u32 device_flags;
> unsigned char rx_csum_enable:1,
> extended_hash:1,
> diff --git a/drivers/net/gianfar_mii.c b/drivers/net/gianfar_mii.c
> index f49a426..c6d77bd 100644
> --- a/drivers/net/gianfar_mii.c
> +++ b/drivers/net/gianfar_mii.c
> @@ -35,6 +35,7 @@
> #include <linux/mii.h>
> #include <linux/phy.h>
> #include <linux/of.h>
> +#include <linux/of_mdio.h>
> #include <linux/of_platform.h>
>
> #include <asm/io.h>
> @@ -152,45 +153,6 @@ static int gfar_mdio_reset(struct mii_bus *bus)
> return 0;
> }
>
> -/* Allocate an array which provides irq #s for each PHY on the given bus */
> -static int *create_irq_map(struct device_node *np)
> -{
> - int *irqs;
> - int i;
> - struct device_node *child = NULL;
> -
> - irqs = kcalloc(PHY_MAX_ADDR, sizeof(int), GFP_KERNEL);
> -
> - if (!irqs)
> - return NULL;
> -
> - for (i = 0; i < PHY_MAX_ADDR; i++)
> - irqs[i] = PHY_POLL;
> -
> - while ((child = of_get_next_child(np, child)) != NULL) {
> - int irq = irq_of_parse_and_map(child, 0);
> - const u32 *id;
> -
> - if (irq == NO_IRQ)
> - continue;
> -
> - id = of_get_property(child, "reg", NULL);
> -
> - if (!id)
> - continue;
> -
> - if (*id < PHY_MAX_ADDR && *id >= 0)
> - irqs[*id] = irq;
> - else
> - printk(KERN_WARNING "%s: "
> - "%d is not a valid PHY address\n",
> - np->full_name, *id);
> - }
> -
> - return irqs;
> -}
> -
> -
> void gfar_mdio_bus_name(char *name, struct device_node *np)
> {
> const u32 *reg;
> @@ -253,7 +215,7 @@ static int gfar_mdio_probe(struct of_device *ofdev,
>
> new_bus->priv = (void __force *)regs;
>
> - new_bus->irq = create_irq_map(np);
> + new_bus->irq = kcalloc(PHY_MAX_ADDR, sizeof(int), GFP_KERNEL);
>
> if (new_bus->irq == NULL) {
> err = -ENOMEM;
> @@ -301,15 +263,7 @@ static int gfar_mdio_probe(struct of_device *ofdev,
>
> gfar_write(&enet_regs->tbipa, tbiaddr);
>
> - /*
> - * The TBIPHY-only buses will find PHYs at every address,
> - * so we mask them all but the TBI
> - */
> - if (!of_device_is_compatible(np, "fsl,gianfar-mdio"))
> - new_bus->phy_mask = ~(1 << tbiaddr);
> -
> - err = mdiobus_register(new_bus);
> -
> + err = of_mdiobus_register(new_bus, np);
> if (err != 0) {
> printk (KERN_ERR "%s: Cannot register as MDIO bus\n",
> new_bus->name);
>
>
--
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
