Hi all, Here are few patches that are needed to support spi-mmc slot on MPC8610HPCD PowerPC boards:
[1/9] spi_mpc83xx: Handles other Freescale processors [2/9] spi_mpc83xx: Quieten down the "Requested speed is too low" message [3/9] spi_mpc83xx: Add small delay after asserting chip-select line [4/9] powerpc/86xx: Add MMC SPI support for MPC8610HPCD boards The rest are cleanups, initially Kumar suggested to rename spi_mpc83xx.c to spi_mpc8xxx.c, but checkpatch told me to fix some other issues. So the following cleanups were prepared: [5/9] spi_mpc83xx: Fix checkpatch issues [6/9] spi_mpc83xx: Split mpc83xx_spi_work() into two routines [7/9] spi_mpc83xx: Remove dead code [8/9] spi_mpc83xx: Rename spi_83xx.c to spi_8xxx.c [9/9] spi_mpc8xxx: s/83xx/8xxx/g Thanks, -- Anton Vorontsov email: cbouatmai...@gmail.com irc://irc.freenode.net/bd2 _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-dev
