Dear vijay sharma,
In message <e571380d0907191136j37d341d7k514f46396a38a...@mail.gmail.com> you
wrote:
>
> I have been woking on upgrading an embedded system based on MPC8241 from
> 2.4.17 linux to 2.6.30 kernel.
Wow, that's a big leap...
You should also consider to update to the latest version of U-Boot;
the time when it was still called PPCBoot is long, long past.
> I am currently struck one point.
>
> Here is the console output where I am struck:
> =================================
> cpboot> bootm
> ## Booting image at 08000000 ...
> Image Name: Linux-2.6.30
> Image Type: PowerPC Linux Kernel Image (gzip compressed)
> Data Size: 21729342 Bytes = 21220 kB = 20 MB
> Load Address: 01900000
> Entry Point: 01900570
> Verifying Checksum ... OK
> Uncompressing Kernel Image ... OK
> Memory <- <0x0 0x10000000> (256MB)
> CPU clock-frequency <- 0xbebc1fe (200MHz)
> CPU timebase-frequency <- 0x17d783f (25MHz)
> CPU bus-frequency <- 0x5f5e0ff (100MHz)
>
> zImage starting: loaded at 0x01900000 (sp: 0x0fdc3a08)
> Allocating 0x165ca04 bytes for kernel ...
> gunzipping (0x00000000 <- 0x0190c000:0x02f58efc)...done 0x1637b54 bytes
You loaded the image at 01900000, but the uncompr4essed image extends
until 02f58efc, i. e. there is a good chance that you will overwrite
parts of the still uncompressed image.
> Linux/PowerPC load:
> Finalizing device tree... flat tree at 0x2f65300 <== Beyond this point no
> output is available.
Your device tree might be wrong, too.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de
Any sufficiently advanced bug is indistinguishable from a feature.
- Rich Kulawiec
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
