On Jul 20, 2009, at 4:36 PM, Anton Vorontsov wrote:
U-Boot maps PCI IO at 0xe0300000, while current dts files specify
0xe2000000. This leads to the following oops with
CONFIG_8139TOO_PIO=y.
8139too Fast Ethernet driver 0.9.28
Machine check in kernel mode.
Caused by (from SRR1=41000): Transfer error ack signal
Oops: Machine check, sig: 7 [#1]
MPC837x RDB
[...]
NIP [00000900] 0x900
LR [c0439df8] rtl8139_init_board+0x238/0x524
Call Trace:
[cf831d90] [c0439dcc] rtl8139_init_board+0x20c/0x524 (unreliable)
[cf831de0] [c043a15c] rtl8139_init_one+0x78/0x65c
[cf831e40] [c0235250] pci_call_probe+0x20/0x30
[...]
This patch fixes the issue by specifying the correct PCI IO base
address.
Signed-off-by: Anton Vorontsov <avoront...@ru.mvista.com>
---
arch/powerpc/boot/dts/mpc8377_rdb.dts | 2 +-
arch/powerpc/boot/dts/mpc8378_rdb.dts | 2 +-
arch/powerpc/boot/dts/mpc8379_rdb.dts | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
applied to merge
- k
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
