On Wed, 9 Sep 2009 15:28:01 -0500
Kumar Gala <ga...@kernel.crashing.org> wrote:
>
> On Sep 9, 2009, at 1:22 PM, Scott Wood wrote:
>
> > On Fri, Sep 04, 2009 at 12:31:25PM +0200, Roland Lezuo wrote:
> >> The following patch is needed to correctly assign the IRQs for the
> >> gianfar driver on the MPC8313ERDB-revc boards. ERR and TX are swapped
> >> as well as the interrupt lines for the two devices.
> >
> > And it will incorrectly assign them on older revisions of the chip.
> >
> > We really should have a u-boot fixup based on SVR.
Roland, is it possible for you to test this u-boot patch?:
>From 44c73137acf20626e930e3f4142e60054d8bd46f Mon Sep 17 00:00:00 2001
From: Kim Phillips <kim.phill...@freescale.com>
Date: Mon, 12 Oct 2009 10:51:20 -0500
Subject: [PATCH] mpc83xx: mpc8313 - handle erratum IPIC1 (TSEC IRQ number
swappage)
mpc8313e erratum IPIC1 swapped TSEC interrupt ID numbers on rev. 1
h/w (see AN3545). The base device tree in use has rev. 1 ID numbers,
so if on Rev. 2 (and higher) h/w, we fix them up here.
Signed-off-by: Kim Phillips <kim.phill...@freescale.com>
---
cpu/mpc83xx/fdt.c | 39 +++++++++++++++++++++++++++++++++++++++
1 files changed, 39 insertions(+), 0 deletions(-)
diff --git a/cpu/mpc83xx/fdt.c b/cpu/mpc83xx/fdt.c
index 13443cb..daf73a6 100644
--- a/cpu/mpc83xx/fdt.c
+++ b/cpu/mpc83xx/fdt.c
@@ -69,6 +69,45 @@ void ft_cpu_setup(void *blob, bd_t *bd)
defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3) ||\
defined(CONFIG_HAS_ETH4) || defined(CONFIG_HAS_ETH5)
fdt_fixup_ethernet(blob);
+#ifdef CONFIG_MPC8313
+ /*
+ * mpc8313e erratum IPIC1 swapped TSEC interrupt ID numbers on rev. 1
+ * h/w (see AN3545). The base device tree in use has rev. 1 ID numbers,
+ * so if on Rev. 2 (and higher) h/w, we fix them up here
+ */
+ if (REVID_MAJOR(immr->sysconf.spridr) >= 2) {
+ int nodeoffset, path;
+ const char *prop;
+
+ nodeoffset = fdt_path_offset(blob, "/aliases");
+ if (nodeoffset >= 0) {
+#if defined(CONFIG_HAS_ETH0)
+ prop = fdt_getprop(blob, nodeoffset, "ethernet0", NULL);
+ if (prop) {
+ u32 tmp[] = { 32, 0x8, 33, 0x8, 34, 0x8 };
+
+ path = fdt_path_offset(blob, prop);
+ prop = fdt_getprop(blob, path, "interrupts", 0);
+ if (prop)
+ fdt_setprop(blob, path, "interrupts",
+ &tmp, sizeof(tmp));
+ }
+#endif
+#if defined(CONFIG_HAS_ETH1)
+ prop = fdt_getprop(blob, nodeoffset, "ethernet1", NULL);
+ if (prop) {
+ u32 tmp[] = { 35, 0x8, 36, 0x8, 37, 0x8 };
+
+ path = fdt_path_offset(blob, prop);
+ prop = fdt_getprop(blob, path, "interrupts", 0);
+ if (prop)
+ fdt_setprop(blob, path, "interrupts",
+ &tmp, sizeof(tmp));
+ }
+#endif
+ }
+ }
+#endif
#endif
do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
--
1.6.4.4
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
