Add missing hookup to existing pci_slot when building the pci_dev from
scratch off the Open Firmware device-tree
Signed-off-by: Benjamin Herrenschmidt <b...@kernel.crashing.org>
---
arch/powerpc/kernel/pci_of_scan.c | 5 +++++
1 files changed, 5 insertions(+), 0 deletions(-)
diff --git a/arch/powerpc/kernel/pci_of_scan.c
b/arch/powerpc/kernel/pci_of_scan.c
index 693eb9a..b6b2e86 100644
--- a/arch/powerpc/kernel/pci_of_scan.c
+++ b/arch/powerpc/kernel/pci_of_scan.c
@@ -123,6 +123,7 @@ struct pci_dev *of_create_pci_dev(struct device_node *node,
{
struct pci_dev *dev;
const char *type;
+ struct pci_slot *slot;
dev = alloc_pci_dev();
if (!dev)
@@ -142,6 +143,10 @@ struct pci_dev *of_create_pci_dev(struct device_node *node,
dev->needs_freset = 0; /* pcie fundamental reset required */
set_pcie_port_type(dev);
+ list_for_each_entry(slot, &dev->bus->slots, list)
+ if (PCI_SLOT(dev->devfn) == slot->number)
+ dev->slot = slot;
+
dev->vendor = get_int_prop(node, "vendor-id", 0xffff);
dev->device = get_int_prop(node, "device-id", 0xffff);
dev->subsystem_vendor = get_int_prop(node, "subsystem-vendor-id", 0);
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
