Hi Srikant,
Thanks for your help. I checked the driver versions and they seem ok. The
problem is that when I download the linux image the program counter is not set
to the address of boot sector of linux kernel, so linux doesn't boot. On the
other hand with the ML507 everything works perfectly. Any idea??
Thanks in advance,Kostas
Date: Thu, 10 Jun 2010 12:34:56 +0530
Subject: Re: Port Linux to ML510
From: [email protected]
To: [email protected]
CC: [email protected]
Hi kostas,
You need to verify that the driver version of serial and Ethernet (probably
X-LLTEMAC) provided in the virtex440.dts matches version used in kernel. Look
for "compatible = <version>" in the drivers. You can probably use EDK 11.2 as
it is the latest from Xilinx.
Have you generated your own DTS and Bitstream (download.bit) files ?
If not then you should look for suitable download.bit for you kernel.
-Srikant
2010/6/10 kostas padarnitsas <[email protected]>
Hello,
I am trying to port Linux to PowerPC on the ML510 Xilinx board. I am using EDK
10.1.3 to build the hardware and also device tree generator and the linux
kernel from xilinx git. I followed the tutorial from
http://xilinx.wikidot.com/powerpc-linux but I have no output. I have attached
my .mhs file and the .dts. Any ideas what may cause this problem because I did
the same thing with ML507 and it was working perfectly?
Thanks in advance,Kostas
Your E-mail and More On-the-Go. Get Windows Live Hotmail Free. Sign up now.
_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://lists.ozlabs.org/listinfo/linuxppc-dev
--
"The Good You Do, The Best You GET"
Regards
Srikanth Krishnakar
**********************
_________________________________________________________________
Hotmail: Free, trusted and rich email service.
https://signup.live.com/signup.aspx?id=60969_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://lists.ozlabs.org/listinfo/linuxppc-dev