Sandeep,
I believe you are the author of the code that adds multiple queue and
multiple group support to the Gianfar driver. Can you update
Documentation/powerpc/dts-bindings/fsl/tsec.txt with the binding
documentation for these nodes, so that we can all know what they're supposed
to look like?
Kim Phillips wrote:
>> + enet0: ether...@b0000 {
>> + queue-gr...@0{
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + reg = <0xB0000 0x1000>;
>> + fsl,rx-err-int-map = <0xAA>;
>> + fsl,tx-int-map = <0xAA>;
>> + interrupts = <29 2 30 2 34 2>;
>> + };
>> + queue-gr...@1{
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + reg = <0xB4000 0x1000>;
>> + fsl,rx-err-int-map = <0x55>;
>> + fsl,tx-int-map = <0x55>;
>> + interrupts = <17 2 18 2 24 2>;
>> + };
>> + };
>> +
>> + enet1: ether...@b1000 {
>
>> + queue-gr...@0{
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + reg = <0xB1000 0x1000>;
>> + fsl,rx-err-int-map = <0xAA>;
>> + fsl,tx-int-map = <0xAA>;
>> + interrupts = <35 2 36 2 40 2>;
>> + };
>> + queue-gr...@1{
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + reg = <0xB5000 0x1000>;
>> + fsl,rx-err-int-map = <0x55>;
>> + fsl,tx-int-map = <0x55>;
>> + interrupts = <51 2 52 2 67 2>;
>> + };
>
> these queue-group nodes, fsl,{r,t}x-* properties...
>
>> + cry...@30000 {
>
>> + fsl,multi-host-mode = "dual";
>> + fsl,channel-remap = <0x3>;
>
> and the above two properties aren't supported by their respective
> drivers, nor are they listed in the dts bindings documentation.
>
> Kim
_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://lists.ozlabs.org/listinfo/linuxppc-dev
