On Mon, 18 Oct 2010 16:40:42 +0800 "tiejun.chen" <tiejun.c...@windriver.com> wrote:
> Shawn Jin wrote: > > Hi, > > > > My target is a mpc875 based board and has FEC ethernet. The phy is > > AM79C874. I have the following configuration for the network support. > > > > CONFIG_PHYLIB=y > > CONFIG_NET_ETHERNET=y > > CONFIG_MII=y > > CONFIG_FS_ENET=y > > CONFIG_FS_ENET_HAS_FEC=y > > CONFIG_FS_ENET_MDIO_FEC=y > > > > However I found that the phy support (AM79C874) is actually in > > drivers/net/fec.c which is compiled only when CONFIG_FEC=y. However > > The phy driver should not be embedded into the NIC driver in theory. Right, those are handled by drivers/net/phy/. > I think you should include the phy driver, mdio-bitbang.c, which should be > support AMD79C874. On MPC8xx you want drivers/net/fs_enet/mii-fec.c. This is just the MDIO driver; it doesn't handle any particular PHY. I don't know if there is a driver specifically for AM79C874, though the generic PHY support may be good enough. -Scott _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
