On 04/26/2011 07:39 PM, Benjamin Herrenschmidt wrote:
> On Tue, 2011-04-26 at 09:38 -0400, Steven A. Falco wrote:
>> On 04/25/2011 08:01 PM, Benjamin Herrenschmidt wrote:
>>> On Mon, 2011-04-25 at 16:10 -0400, Steven A. Falco wrote:
>>>> I'm getting an error message when trying to talk to some custom
>>>> hardware:
>>>>
>>>> dx83xx 0001:43:00.0: device not available because of BAR 0
>>>> [0xa1000000-0xa1ffffff] collisions
>>>>
>>>> I see in setup-res.c that this message comes out when there is no
>>>> parent for
>>>> a device resource.
>>>
>>> .../...
>>>
>>> It mostly happens in arch/powerpc/kernel/pci-common.c and the generic
>>> setup-res.c
>>>
>>> Try #define DEBUG at the top (before the #includes) of pci-common.c and
>>> pci_32.c (remove the exiting #undef in the last one) and send us the
>>> full dmesg log, along with the output of cat /proc/iomem
>
> Have you set any specific flags ? IE. Modified the value of
> ppc_pci_flags from what the 4xx code sets originally ?
The only flag that is set is the same as what is in Kilauea:
ppc_pci_set_flags(PPC_PCI_REASSIGN_ALL_RSRC);
> It does look to me like some of your device BARs have been setup already
> by the firmware in a way that conflict with the way you configure your
> ranges, and the kernel doesn't appear to detect nor try to remap that
> which would happen if you have the "probe only" flag set.
That is possible. The PLX PCIe switch chip does use some memory for its
own purposes - namely to expose the PCIe config space in memory. I believe
that is where the extra 128 k bytes are coming from.
Do I need to represent the PCIe switch in the device tree? If so, is
there an example of what it might look like? I took a stab at it, shown
below.
I believe you are correct - that PLX switch's own memory appears to be
confusing the allocation process. Perhaps the allocation code does not
expect bridges/switches to require memory of their own.
> IE. On your c0000000 bus, you have memory at 90000000 CPU space mapped
> to 80000000 PCI space. However, when probing, the kernel finds:
>
> pci 0001:41:00.0: reg 10 32bit mmio: [0x90000000-0x9001ffff]
>
> IE. A BAR was already set with a value of 90000000 PCI-side which is out
> of the bounds you have for your bus.
>
> Maybe you really want to configure that second bus to have CPU 90000000
> mapped to 90000000 PCI-side ? (IE. a 1:1 mapping). That would be
> something to fix in your "ranges" property.
I've taken a shot at representing the PCIe switch in the device tree, and
I've gone to a 1:1 mapping. Here is what the device tree now has:
PCIE1: pciex@0c0000000 {
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex";
primary;
port = <0x1>; /* port number */
reg = <0xc0000000 0x20000000 /* Config space access */
0xef001000 0x00001000>; /* Registers */
dcr-reg = <0x060 0x020>;
sdr-base = <0x440>;
ranges = <0x02000000 0x00000000 0x90000000 0x90000000 0x00000000
0x10000000
0x01000000 0x00000000 0x00000000 0xe8010000 0x00000000
0x00010000>;
dma-ranges = <0x42000000 0x0 0x0 0x0 0x0 0x80000000>;
bus-range = <0x40 0x7f>;
interrupt-map-mask = <0x0 0x0 0x0 0x7>;
interrupt-map = <
0x0 0x0 0x0 0x1 &UIC2 0xb 0x4 /* swizzled int A */
0x0 0x0 0x0 0x2 &UIC2 0xc 0x4 /* swizzled int B */
0x0 0x0 0x0 0x3 &UIC2 0xd 0x4 /* swizzled int C */
0x0 0x0 0x0 0x4 &UIC2 0xe 0x4 /* swizzled int D */>;
/* PLX PCIe switch - no idea if this is correct / necessary yet */
pcie@0 {
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
reg = <0 0 0 0 0>;
ranges = <0x02000000 0x00000000 0x90000000 0x02000000
0x00000000 0x90000000 0x00000000 0x10000000
0x01000000 0x00000000 0x00000000 0x01000000
0x00000000 0x00000000 0x00000000 0x00010000>;
};
};
/proc/iomem is unchanged. It looks a bit strange. I see space reserved
for bus 0001:43 and 0001:44, but I don't see the actual device BARs. I.e.
I'd expect to see four extra lines:
90000000-90ffffff : 0001:43.00.0 // ASIC 0 BAR 0
91000000-91ffffff : 0001:43.00.0 // ASIC 0 BAR 1
92000000-92ffffff : 0001:44.00.0 // ASIC 1 BAR 0
93000000-93ffffff : 0001:44.00.0 // ASIC 1 BAR 1
Here is what I do see. Notice that the above lines are missing:
90000000-9fffffff : /plb/pciex@0c0000000
90000000-93ffffff : PCI Bus 0001:41
90000000-93ffffff : PCI Bus 0001:42
90000000-91ffffff : PCI Bus 0001:43 // Bus is shown but no device
connected
92000000-93ffffff : PCI Bus 0001:44 // Bus is shown but no device
connected
94000000-940fffff : PCI Bus 0001:41
94000000-9401ffff : 0001:41:00.0 // PLX PCIe switch BAR 0 - 128 kB
e0000000-e7ffffff : /plb/pciex@0a0000000
e0000000-e5ffffff : PCI Bus 0000:01
e0000000-e3ffffff : 0000:01:00.0
e4000000-e40fffff : 0000:01:00.0
e4100000-e41fffff : 0000:01:00.0
ef600200-ef600207 : serial
ef600300-ef600307 : serial
ef600600-ef600606 : spi_ppc4xx_of
ef6c0000-ef6cffff : dwc_otg.0
ef6c0000-ef6cffff : dwc_otg
fc000000-ffffffff : fc000000.nor_flash
Here is a new dmesg log. What you will see is that the various fixups
now produce CPU addresses identical to the bus addresses. But the
"order" is messed up. In the /proc/iomem above, the PCIe switch
resources show up as 94000000-9401ffff : 0001:41:00.0, but in the
log below, you will see PCI:0001:41:00.0 Resource 0
0000000090000000-000000009001ffff
So somehow it moved. And that in turn moves the ASICs also.
/proc/iomem has:
90000000-91ffffff : PCI Bus 0001:43
92000000-93ffffff : PCI Bus 0001:44
but the log below has:
pci 0001:43:00.0: reg 10 32bit mmio: [0x91000000-0x91ffffff]
pci 0001:43:00.0: reg 14 32bit mmio: [0x92000000-0x92ffffff]
pci 0001:44:00.0: reg 10 32bit mmio: [0x93000000-0x93ffffff]
pci 0001:44:00.0: reg 14 32bit mmio: [0x94000000-0x94ffffff]
Since this is embedded hardware, I have no objection to completely
specifying things in the dts. My problem is that I have not found any
examples of how I would do this. And my attempts to come up with the
right magic on my own have so far not worked. :-)
Steve
Using Flex-AM machine description
Linux version 2.6.30.3-00063-g0af2edc-dirty (sfa...@hw1.cs.myharris.net) (gcc
version 4.2.2) #49 Wed Apr 27 09:32:09 EDT 2011
Found legacy serial port 0 for /plb/opb/serial@ef600200
mem=ef600200, taddr=ef600200, irq=0, clk=33333333, speed=0
Found legacy serial port 1 for /plb/opb/serial@ef600300
mem=ef600300, taddr=ef600300, irq=0, clk=33333333, speed=0
Top of RAM: 0x10000000, Total RAM: 0x10000000
Memory hole size: 0MB
Zone PFN ranges:
DMA 0x00000000 -> 0x00010000
Normal 0x00010000 -> 0x00010000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0x00000000 -> 0x00010000
On node 0 totalpages: 65536
free_area_init_node: node 0, pgdat c0406bdc, node_mem_map c053b000
DMA zone: 512 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 65024 pages, LIFO batch:15
MMU: Allocated 1088 bytes of context maps for 255 contexts
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
Kernel command line: root=/dev/nfs rw
nfsroot=/sandbox/hydra/sfalco/flx-codec/rootfs
ip=137.237.178.150:137.237.179.21:137.237.178.1:255.255.255.0:flx-am:eth0:off
console=ttyS1,115200 debug
NR_IRQS:512
UIC0 (32 IRQ sources) at DCR 0xc0
UIC1 (32 IRQ sources) at DCR 0xd0
irq: irq 30 on host /interrupt-controller mapped to virtual irq 30
UIC2 (32 IRQ sources) at DCR 0xe0
irq: irq 28 on host /interrupt-controller mapped to virtual irq 28
PID hash table entries: 1024 (order: 10, 4096 bytes)
time_init: decrementer frequency = 400.000000 MHz
time_init: processor frequency = 400.000000 MHz
clocksource: timebase mult[a00000] shift[22] registered
clockevent: decrementer mult[6666] shift[16] cpu[0]
I-pipe 2.7-02: pipeline enabled.
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 254208k/262144k available (3944k kernel code, 7656k reserved, 184k
data, 1196k bss, 164k init)
Kernel virtual memory layout:
* 0xffffe000..0xfffff000 : fixmap
* 0xfde00000..0xfe000000 : consistent mem
* 0xfde00000..0xfde00000 : early ioremap
* 0xd1000000..0xfde00000 : vmalloc & ioremap
SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Calibrating delay loop... 798.72 BogoMIPS (lpj=1597440)
Mount-cache hash table entries: 512
net_namespace: 520 bytes
NET: Registered protocol family 16
PCIE0: Checking link...
PCIE0: Device detected, waiting for link...
PCIE0: link is up !
PCI host bridge /plb/pciex@0a0000000 (primary) ranges:
MEM 0x00000000e0000000..0x00000000e7ffffff -> 0x00000000e0000000
IO 0x00000000e8000000..0x00000000e800ffff -> 0x0000000000000000
4xx PCI DMA offset set to 0x00000000
PCIE0: successfully set as root-complex
PCIE1: Checking link...
PCIE1: Device detected, waiting for link...
PCIE1: link is up !
PCI host bridge /plb/pciex@0c0000000 (primary) ranges:
MEM 0x0000000090000000..0x000000009fffffff -> 0x0000000090000000
IO 0x00000000e8010000..0x00000000e801ffff -> 0x0000000000000000
4xx PCI DMA offset set to 0x00000000
PCIE1: successfully set as root-complex
PCI: Probing PCI hardware
PCI: Scanning PHB /plb/pciex@0a0000000
PCI: PHB IO resource = 00000000fffe0000-00000000fffeffff [100]
PCI: PHB MEM resource 0 = 00000000e0000000-00000000e7ffffff [200]
PCI: PHB MEM offset = 0000000000000000
PCI: PHB IO offset = fffe0000
pci 0000:00:00.0: reg 10 32bit mmio: [0x000000-0x7fffffff]
PCI:0000:00:00.0 Resource 0 0000000000000000-000000007fffffff [21208] is
unassigned
PCI: Hiding 4xx host bridge resources 0000:00:00.0
PCI: Fixup bus devices 0 (PHB)
pci_busdev_to_OF_node(0,0x0)
parent is /plb/pciex@0a0000000
result is <NULL>
PCI: Try to map irq for 0000:00:00.0...
pci_busdev_to_OF_node(0,0x0)
parent is /plb/pciex@0a0000000
result is <NULL>
pci 0000:01:00.0: reg 10 32bit mmio: [0x80000000-0x800fffff]
pci 0000:01:00.0: reg 14 32bit mmio: [0x80100000-0x801fffff]
pci 0000:01:00.0: reg 18 32bit mmio: [0x84000000-0x87ffffff]
PCI:0000:01:00.0 Resource 0 0000000080000000-00000000800fffff [20200] fixup...
PCI:0000:01:00.0 0000000080000000-00000000800fffff
PCI:0000:01:00.0 Resource 1 0000000080100000-00000000801fffff [20200] fixup...
PCI:0000:01:00.0 0000000080100000-00000000801fffff
PCI:0000:01:00.0 Resource 2 0000000084000000-0000000087ffffff [20200] fixup...
PCI:0000:01:00.0 0000000084000000-0000000087ffffff
pci 0000:00:00.0: bridge io port: [0x00-0xfff]
pci 0000:00:00.0: bridge 32bit mmio: [0x80000000-0x87ffffff]
PCI:0000:00:00.0 Bus rsrc 0 0000000000000000-0000000000000fff [101] fixup...
PCI:0000:00:00.0 00000000fffe0000-00000000fffe0fff
PCI:0000:00:00.0 Bus rsrc 1 0000000080000000-0000000087ffffff [200] fixup...
PCI:0000:00:00.0 0000000080000000-0000000087ffffff
PCI: Fixup bus devices 1 (0000:00:00.0)
pci_busdev_to_OF_node(1,0x0)
PCI: Try to map irq for 0000:01:00.0...
pci_busdev_to_OF_node(1,0x0)
pci_busdev_to_OF_node(0,0x0)
parent is /plb/pciex@0a0000000
result is <NULL>
Got one, spec 2 cells (0x00000000 0x00000004...) on /interrupt-controller2
irq: irq 0 on host /interrupt-controller2 mapped to virtual irq 16
Mapped to linux irq 16
PCI: Scanning PHB /plb/pciex@0c0000000
PCI: PHB IO resource = 0000000000000000-000000000000ffff [100]
PCI: PHB MEM resource 0 = 0000000090000000-000000009fffffff [200]
PCI: PHB MEM offset = 0000000000000000
PCI: PHB IO offset = 00000000
pci 0001:40:00.0: reg 10 32bit mmio: [0x000000-0x7fffffff]
PCI:0001:40:00.0 Resource 0 0000000000000000-000000007fffffff [21208] is
unassigned
PCI: Hiding 4xx host bridge resources 0001:40:00.0
PCI: Fixup bus devices 64 (PHB)
pci_busdev_to_OF_node(64,0x0)
parent is /plb/pciex@0c0000000
result is /plb/pciex@0c0000000/pcie@0
PCI: Try to map irq for 0001:40:00.0...
pci_busdev_to_OF_node(64,0x0)
parent is /plb/pciex@0c0000000
result is /plb/pciex@0c0000000/pcie@0
pci 0001:41:00.0: reg 10 32bit mmio: [0x90000000-0x9001ffff]
PCI:0001:41:00.0 Resource 0 0000000090000000-000000009001ffff [20200] fixup...
PCI:0001:41:00.0 0000000090000000-000000009001ffff
pci 0001:41:00.0: PME# supported from D0 D3hot D3cold
pci 0001:41:00.0: PME# disabled
pci 0001:40:00.0: bridge io port: [0x00-0xfff]
pci 0001:40:00.0: bridge 32bit mmio: [0x90000000-0x94ffffff]
PCI:0001:40:00.0 Bus rsrc 0 0000000000000000-0000000000000fff [101] fixup...
PCI:0001:40:00.0 0000000000000000-0000000000000fff
PCI:0001:40:00.0 Bus rsrc 1 0000000090000000-0000000094ffffff [200] fixup...
PCI:0001:40:00.0 0000000090000000-0000000094ffffff
PCI: Fixup bus devices 65 (0001:40:00.0)
pci_busdev_to_OF_node(65,0x0)
parent is /plb/pciex@0c0000000/pcie@0
result is <NULL>
PCI: Try to map irq for 0001:41:00.0...
pci_busdev_to_OF_node(65,0x0)
parent is /plb/pciex@0c0000000/pcie@0
result is <NULL>
pci_busdev_to_OF_node(64,0x0)
parent is /plb/pciex@0c0000000
result is /plb/pciex@0c0000000/pcie@0
Got one, spec 2 cells (0x0000000b 0x00000004...) on /interrupt-controller2
irq: irq 11 on host /interrupt-controller2 mapped to virtual irq 17
Mapped to linux irq 17
pci 0001:42:01.0: PME# supported from D0 D3hot D3cold
pci 0001:42:01.0: PME# disabled
pci 0001:42:02.0: PME# supported from D0 D3hot D3cold
pci 0001:42:02.0: PME# disabled
pci 0001:41:00.0: bridge 32bit mmio: [0x90100000-0x94ffffff]
PCI:0001:41:00.0 Bus rsrc 1 0000000090100000-0000000094ffffff [200] fixup...
PCI:0001:41:00.0 0000000090100000-0000000094ffffff
PCI: Fixup bus devices 66 (0001:41:00.0)
pci_busdev_to_OF_node(66,0x8)
PCI: Try to map irq for 0001:42:01.0...
pci_busdev_to_OF_node(66,0x8)
pci_busdev_to_OF_node(65,0x0)
parent is /plb/pciex@0c0000000/pcie@0
result is <NULL>
pci_busdev_to_OF_node(64,0x0)
parent is /plb/pciex@0c0000000
result is /plb/pciex@0c0000000/pcie@0
Got one, spec 2 cells (0x0000000c 0x00000004...) on /interrupt-controller2
irq: irq 12 on host /interrupt-controller2 mapped to virtual irq 18
Mapped to linux irq 18
pci_busdev_to_OF_node(66,0x10)
PCI: Try to map irq for 0001:42:02.0...
pci_busdev_to_OF_node(66,0x10)
pci_busdev_to_OF_node(65,0x0)
parent is /plb/pciex@0c0000000/pcie@0
result is <NULL>
pci_busdev_to_OF_node(64,0x0)
parent is /plb/pciex@0c0000000
result is /plb/pciex@0c0000000/pcie@0
Got one, spec 2 cells (0x0000000d 0x00000004...) on /interrupt-controller2
irq: irq 13 on host /interrupt-controller2 mapped to virtual irq 19
Mapped to linux irq 19
pci 0001:43:00.0: reg 10 32bit mmio: [0x91000000-0x91ffffff]
pci 0001:43:00.0: reg 14 32bit mmio: [0x92000000-0x92ffffff]
PCI:0001:43:00.0 Resource 0 0000000091000000-0000000091ffffff [21208] fixup...
PCI:0001:43:00.0 0000000091000000-0000000091ffffff
PCI:0001:43:00.0 Resource 1 0000000092000000-0000000092ffffff [21208] fixup...
PCI:0001:43:00.0 0000000092000000-0000000092ffffff
pci 0001:42:01.0: bridge 32bit mmio: [0x90100000-0x92ffffff]
PCI:0001:42:01.0 Bus rsrc 1 0000000090100000-0000000092ffffff [200] fixup...
PCI:0001:42:01.0 0000000090100000-0000000092ffffff
PCI: Fixup bus devices 67 (0001:42:01.0)
pci_busdev_to_OF_node(67,0x0)
PCI: Try to map irq for 0001:43:00.0...
pci_busdev_to_OF_node(67,0x0)
pci_busdev_to_OF_node(66,0x8)
pci_busdev_to_OF_node(65,0x0)
parent is /plb/pciex@0c0000000/pcie@0
result is <NULL>
pci_busdev_to_OF_node(64,0x0)
parent is /plb/pciex@0c0000000
result is /plb/pciex@0c0000000/pcie@0
Got one, spec 2 cells (0x0000000c 0x00000004...) on /interrupt-controller2
Mapped to linux irq 18
pci 0001:44:00.0: reg 10 32bit mmio: [0x93000000-0x93ffffff]
pci 0001:44:00.0: reg 14 32bit mmio: [0x94000000-0x94ffffff]
PCI:0001:44:00.0 Resource 0 0000000093000000-0000000093ffffff [21208] fixup...
PCI:0001:44:00.0 0000000093000000-0000000093ffffff
PCI:0001:44:00.0 Resource 1 0000000094000000-0000000094ffffff [21208] fixup...
PCI:0001:44:00.0 0000000094000000-0000000094ffffff
pci 0001:42:02.0: bridge 32bit mmio: [0x93000000-0x94ffffff]
PCI:0001:42:02.0 Bus rsrc 1 0000000093000000-0000000094ffffff [200] fixup...
PCI:0001:42:02.0 0000000093000000-0000000094ffffff
PCI: Fixup bus devices 68 (0001:42:02.0)
pci_busdev_to_OF_node(68,0x0)
PCI: Try to map irq for 0001:44:00.0...
pci_busdev_to_OF_node(68,0x0)
pci_busdev_to_OF_node(66,0x10)
pci_busdev_to_OF_node(65,0x0)
parent is /plb/pciex@0c0000000/pcie@0
result is <NULL>
pci_busdev_to_OF_node(64,0x0)
parent is /plb/pciex@0c0000000
result is /plb/pciex@0c0000000/pcie@0
Got one, spec 2 cells (0x0000000d 0x00000004...) on /interrupt-controller2
Mapped to linux irq 19
PCI: Allocating bus resources for 0000:00...
PCI: PHB (bus 0) bridge rsrc 0: 00000000fffe0000-00000000fffeffff [0x100],
parent c03de440 (PCI IO)
PCI: PHB (bus 0) bridge rsrc 1: 00000000e0000000-00000000e7ffffff [0x200],
parent c03de424 (PCI mem)
PCI: Allocating bus resources for 0000:01...
PCI: Allocating bus resources for 0001:40...
PCI: PHB (bus 64) bridge rsrc 0: 0000000000000000-000000000000ffff [0x100],
parent c03de440 (PCI IO)
PCI: PHB (bus 64) bridge rsrc 1: 0000000090000000-000000009fffffff [0x200],
parent c03de424 (PCI mem)
PCI: Allocating bus resources for 0001:41...
PCI: Allocating bus resources for 0001:42...
PCI: Allocating bus resources for 0001:43...
PCI: Allocating bus resources for 0001:44...
Reserving legacy ranges for domain 0000
Candidate legacy IO: [0xfffe0000-0xfffe0fff]
hose mem offset: 0000000000000000
hose mem res: [0xe0000000-0xe7ffffff]
Reserving legacy ranges for domain 0001
Candidate legacy IO: [0x00-0xfff]
hose mem offset: 0000000000000000
hose mem res: [0x90000000-0x9fffffff]
PCI: Assigning unassigned resources...
pci 0000:00:00.0: PCI bridge, secondary bus 0000:01
pci 0000:00:00.0: IO window: disabled
pci 0000:00:00.0: MEM window: 0xe0000000-0xe5ffffff
pci 0000:00:00.0: PREFETCH window: disabled
pci 0001:42:01.0: PCI bridge, secondary bus 0001:43
pci 0001:42:01.0: IO window: disabled
pci 0001:42:01.0: MEM window: disabled
pci 0001:42:01.0: PREFETCH window: 0x00000090000000-0x00000091ffffff
pci 0001:42:02.0: PCI bridge, secondary bus 0001:44
pci 0001:42:02.0: IO window: disabled
pci 0001:42:02.0: MEM window: disabled
pci 0001:42:02.0: PREFETCH window: 0x00000092000000-0x00000093ffffff
pci 0001:41:00.0: PCI bridge, secondary bus 0001:42
pci 0001:41:00.0: IO window: disabled
pci 0001:41:00.0: MEM window: disabled
pci 0001:41:00.0: PREFETCH window: 0x00000090000000-0x00000093ffffff
pci 0001:40:00.0: PCI bridge, secondary bus 0001:41
pci 0001:40:00.0: IO window: disabled
pci 0001:40:00.0: MEM window: 0x94000000-0x940fffff
pci 0001:40:00.0: PREFETCH window: 0x00000090000000-0x00000093ffffff
pci_bus 0000:00: resource 0 io: [0xfffe0000-0xfffeffff]
pci_bus 0000:00: resource 1 mem: [0xe0000000-0xe7ffffff]
pci_bus 0000:01: resource 0 mem: [0xfffe0000-0xfffe0fff]
pci_bus 0000:01: resource 1 mem: [0xe0000000-0xe5ffffff]
pci_bus 0001:40: resource 0 io: [0x00-0xffff]
pci_bus 0001:40: resource 1 mem: [0x90000000-0x9fffffff]
pci_bus 0001:41: resource 0 mem: [0x0-0xfff]
pci_bus 0001:41: resource 1 mem: [0x94000000-0x940fffff]
pci_bus 0001:41: resource 2 pref mem [0x90000000-0x93ffffff]
pci_bus 0001:42: resource 1 mem: [0x90100000-0x94ffffff]
pci_bus 0001:42: resource 2 pref mem [0x90000000-0x93ffffff]
pci_bus 0001:43: resource 1 mem: [0x90100000-0x92ffffff]
pci_bus 0001:43: resource 2 pref mem [0x90000000-0x91ffffff]
pci_bus 0001:44: resource 1 mem: [0x93000000-0x94ffffff]
pci_bus 0001:44: resource 2 pref mem [0x92000000-0x93ffffff]
bio: create slab <bio-0> at 0
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Switched to high resolution mode on CPU 0
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
NET: Registered protocol family 1
irq: irq 26 on host /interrupt-controller mapped to virtual irq 26
irq: irq 1 on host /interrupt-controller mapped to virtual irq 20
irq: irq 30 on host /interrupt-controller2 mapped to virtual irq 21
irq: irq 26 on host /interrupt-controller1 mapped to virtual irq 22
irq: irq 12 on host /interrupt-controller mapped to virtual irq 23
I-pipe: Domain Xenomai registered.
Xenomai: hal/powerpc started.
Xenomai: real-time nucleus v2.4.10 (Flavor Crystal 7) loaded.
Xenomai: starting native API services.
Xenomai: starting POSIX services.
Xenomai: starting RTDM services.
Installing knfsd (copyright (C) 1996 o...@monad.swb.de).
fuse init (API version 7.11)
msgmni has been set to 497
alg: No test for stdrng (krng)
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
aer 0001:41:00.0:pcie12: service driver aer loaded
aer 0001:42:01.0:pcie22: service driver aer loaded
aer 0001:42:02.0:pcie22: service driver aer loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
serial8250.0: ttyS0 at MMIO 0xef600200 (irq = 26) is a 16550A
serial8250.0: ttyS1 at MMIO 0xef600300 (irq = 20) is a 16550A
console [ttyS1] enabled
ef600200.serial: ttyS0 at MMIO 0xef600200 (irq = 26) is a 16550A
ef600300.serial: ttyS1 at MMIO 0xef600300 (irq = 20) is a 16550A
brd: module loaded
Driver 'sd' needs updating - please use bus_type methods
PPC 4xx OCP EMAC driver, version 3.54
irq: irq 10 on host /interrupt-controller mapped to virtual irq 24
irq: irq 11 on host /interrupt-controller mapped to virtual irq 25
irq: irq 0 on host /interrupt-controller1 mapped to virtual irq 27
irq: irq 1 on host /interrupt-controller1 mapped to virtual irq 29
irq: irq 2 on host /interrupt-controller1 mapped to virtual irq 31
MAL v2 /plb/mcmal, 2 TX channels, 2 RX channels
RGMII /plb/opb/emac-rgmii@ef600b00 initialized with MDIO support
irq: irq 24 on host /interrupt-controller mapped to virtual irq 32
irq: irq 29 on host /interrupt-controller1 mapped to virtual irq 33
/plb/opb/emac-rgmii@ef600b00: input 0 in RGMII mode
eth0: EMAC-0 /plb/opb/ethernet@ef600900, MAC 00:90:f9:10:1a:08
eth0: found Marvell 88E1111 Ethernet PHY (0x04)
irq: irq 25 on host /interrupt-controller mapped to virtual irq 34
irq: irq 31 on host /interrupt-controller1 mapped to virtual irq 35
/plb/opb/emac-rgmii@ef600b00: input 1 in RGMII mode
eth1: EMAC-1 /plb/opb/ethernet@ef600a00, MAC 00:90:f9:10:1a:09
eth1: found Marvell 88E1111 Ethernet PHY (0x05)
fc000000.nor_flash: Found 1 x16 devices at 0x0 in 16-bit bank
Intel/Sharp Extended Query Table at 0x010A
Intel/Sharp Extended Query Table at 0x010A
Intel/Sharp Extended Query Table at 0x010A
Intel/Sharp Extended Query Table at 0x010A
Intel/Sharp Extended Query Table at 0x010A
Using buffer write method
Using auto-unlock on power-up/resume
cfi_cmdset_0001: Erase suspend on write enabled
erase region 0: offset=0x0,size=0x8000,blocks=4
erase region 1: offset=0x20000,size=0x20000,blocks=511
RedBoot partition parsing not available
Creating 7 MTD partitions on "fc000000.nor_flash":
0x000000000000-0x000000800000 : "kernel0"
0x000000800000-0x000001000000 : "kernel1"
0x000001000000-0x000001800000 : "kernel2"
0x000001800000-0x000003f40000 : "install"
0x000003f40000-0x000003f60000 : "env0"
0x000003f60000-0x000003f80000 : "env1"
0x000003f80000-0x000004000000 : "u-boot"
irq: irq 8 on host /interrupt-controller mapped to virtual irq 36
spi_ppc4xx_of ef600600.spi: driver initialized
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
dwc_otg: version 2.60a 22-NOV-2006
dwc_otg: Shared Tx FIFO mode
dwc_otg: Using DMA mode
dwc_otg dwc_otg.0: DWC OTG Controller
dwc_otg dwc_otg.0: new USB bus registered, assigned bus number 1
dwc_otg dwc_otg.0: irq 21, io mem 0x00000000
dwc_otg: Init: Port Power? op_state=1
dwc_otg: Init: Power Port (0)
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: DWC OTG Controller
usb usb1: Manufacturer: Linux 2.6.30.3-00063-g0af2edc-dirty dwc_otg_hcd
usb usb1: SerialNumber: dwc_otg.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
i2c /dev entries driver
irq: irq 2 on host /interrupt-controller mapped to virtual irq 37
ibm-iic ef600400.i2c: using standard (100 kHz) mode
irq: irq 7 on host /interrupt-controller mapped to virtual irq 38
ibm-iic ef600500.i2c: using standard (100 kHz) mode
lm75: probe of 0-0048 failed with error -121
hwmon-vid: Unknown VRM version of your CPU
PowerPC Book-E Watchdog Timer Loaded
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
802.1Q VLAN Support v1.8 Ben Greear <gree...@candelatech.com>
All bugs added by David S. Miller <da...@redhat.com>
usb 1-1: new high speed USB device using dwc_otg and address 2
usb 1-1: New USB device found, idVendor=0634, idProduct=0655
usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: Real SSD eUSB 2GB
usb 1-1: Manufacturer: Micron Technology
usb 1-1: SerialNumber: 4BF0022700035321
usb 1-1: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
eth0: link is down
eth0: link is up, 100 HDX
IP-Config: Complete:
device=eth0, addr=137.237.178.150, mask=255.255.255.0, gw=137.237.178.1,
host=flx-am, domain=, nis-domain=(none),
bootserver=137.237.179.21, rootserver=137.237.179.21, rootpath=
Looking up port of RPC 100003/2 on 137.237.179.21
Looking up port of RPC 100005/1 on 137.237.179.21
VFS: Mounted root (nfs filesystem) on device 0:14.
Freeing unused kernel memory: 164k init
INIT: version 2.86 booting
scsi 0:0:0:0: Direct-Access MICRON eUSB DISK 1110 PQ: 0 ANSI: 0 CCS
sd 0:0:0:0: Attached scsi generic sg0 type 0
usb-storage: device scan complete
sd 0:0:0:0: [sda] 3964928 512-byte hardware sectors: (2.03 GB/1.89 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] Assuming drive cache: write through
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
Welcome to DENX Embedded Linux Environment
Press 'I' to enter interactive startup.
Cannot access the Hardware Clock via any known method.
Use the --debug option to see the details of our search for an access method.
Setting clock : Wed Dec 31 19:00:10 EST 1969 [ OK ]
Building the cache [ OK ]
Setting hostname flx-am: [ OK ]
Mounting local filesystems: [ OK ]
Enabling /etc/fstab swaps: [ OK ]
INIT: Entering runlevel: 3
Entering non-interactive startup
FATAL: Module ipv6 not found.
Bringing up loopback interface: [ OK ]
FATAL: Module ipv6 not found.
Starting system logger: [ OK ]
Starting kernel logger: [ OK ]
Starting rpcbind: [ OK ]
Mounting NFS filesystems: [ OK ]
Mounting other filesystems: [ OK ]
Starting xinetd: [ OK ]
DENX ELDK version 4.2 build 2008-04-01
Linux 2.6.30.3-00063-g0af2edc-dirty on a ppc
flx-am login: root
Password:
Last login: Wed Dec 31 19:06:54 on console
-bash-3.2# modprobe d7
dx83xx 0001:43:00.0: device not available because of BAR 0
[0x91000000-0x91ffffff] collisions
dx83xx: probe of 0001:43:00.0 failed with error -22
dx83xx 0001:44:00.0: device not available because of BAR 0
[0x93000000-0x93ffffff] collisions
dx83xx: probe of 0001:44:00.0 failed with error -22
-bash-3.2#
>
> Cheers,
> Ben.
>
--
A: Because it makes the logic of the discussion difficult to follow.
Q: Why shouldn't I top post?
A: No.
Q: Should I top post?
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
