Hi, I have a custom made 460EX board. On that board u-boot can see a PCI device but linux kernel cannot see it. What could be the problem?
On u-boot "pci 2" commands displays following device: Scanning PCI devices on bus 2 BusDevFun VendorId DeviceId Device Class Sub-Class _____________________________________________________________ 02.00.00 0x1000 0x0072 Mass storage controller 0x00 And when linux is booted there is only one pci device (bridge): #ls /sys/bus/pci/devices 0000:80:00.0 Thanks in advance. -Prashant
_______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
