The PC parallel port Kconfig as acquired one of those messy terms to
describe it's architecture dependencies:
depends on (!SPARC64 || PCI) && !SPARC32 && !M32R && !FRV && \
(!M68K || ISA) && !MN10300 && !AVR32 && !BLACKFIN
This isn't just ugly - it also almost certainly describes the dependencies
too coarse grainedly. This is an attempt at cleaing the mess up.
I tried to faithfully aproximate the old behaviour but the existing
behaviour seems inacurate if not wrong for some architectures or platforms.
To improve on this I rely on comments from other arch and platforms
maintainers. Any system that can take PCI multi-IO card or has a PC-style
parallel port on the mainboard should probably should now do a
select HAVE_PC_PARPORT. And some arch Kconfig files should further
restrict the use of HAVE_PC_PARPORT to only those platforms that actually
need it.
Thanks,
Ralf
Signed-off-by: Ralf Baechle <r...@linux-mips.org>
arch/alpha/Kconfig | 1 +
arch/arm/Kconfig | 1 +
arch/cris/Kconfig | 1 +
arch/h8300/Kconfig | 1 +
arch/ia64/Kconfig | 1 +
arch/m68k/Kconfig.mmu | 1 +
arch/microblaze/Kconfig | 1 +
arch/mips/Kconfig | 16 ++++++++++++++++
arch/parisc/Kconfig | 1 +
arch/powerpc/Kconfig | 1 +
arch/score/Kconfig | 7 ++++---
arch/sh/Kconfig | 1 +
arch/sparc/Kconfig | 1 +
arch/tile/Kconfig | 1 +
arch/unicore32/Kconfig | 1 +
arch/x86/Kconfig | 1 +
arch/xtensa/Kconfig | 1 +
drivers/parport/Kconfig | 6 ++++--
18 files changed, 39 insertions(+), 5 deletions(-)
diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig
index 60219bf..2ba8dd7 100644
--- a/arch/alpha/Kconfig
+++ b/arch/alpha/Kconfig
@@ -9,6 +9,7 @@ config ALPHA
select HAVE_PERF_EVENTS
select HAVE_DMA_ATTRS
select HAVE_GENERIC_HARDIRQS
+ select HAVE_PC_PARPORT
select GENERIC_IRQ_PROBE
select AUTO_IRQ_AFFINITY if SMP
select GENERIC_IRQ_SHOW
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 9adc278..2968751f 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -21,6 +21,7 @@ config ARM
select HAVE_KERNEL_LZO
select HAVE_KERNEL_LZMA
select HAVE_IRQ_WORK
+ select HAVE_PC_PARPORT
select HAVE_PERF_EVENTS
select PERF_USE_VMALLOC
select HAVE_REGS_AND_STACK_ACCESS_API
diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig
index 17addac..2eda6cf 100644
--- a/arch/cris/Kconfig
+++ b/arch/cris/Kconfig
@@ -51,6 +51,7 @@ config CRIS
default y
select HAVE_IDE
select HAVE_GENERIC_HARDIRQS
+ select HAVE_PC_PARPORT
select GENERIC_IRQ_SHOW
config HZ
diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig
index 091ed61..da08646 100644
--- a/arch/h8300/Kconfig
+++ b/arch/h8300/Kconfig
@@ -3,6 +3,7 @@ config H8300
default y
select HAVE_IDE
select HAVE_GENERIC_HARDIRQS
+ select HAVE_PC_PARPORT
select GENERIC_IRQ_SHOW
config SYMBOL_PREFIX
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 38280ef..849805a 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -23,6 +23,7 @@ config IA64
select HAVE_ARCH_TRACEHOOK
select HAVE_DMA_API_DEBUG
select HAVE_GENERIC_HARDIRQS
+ select HAVE_PC_PARPORT
select GENERIC_IRQ_PROBE
select GENERIC_PENDING_IRQ if SMP
select IRQ_PER_CPU
diff --git a/arch/m68k/Kconfig.mmu b/arch/m68k/Kconfig.mmu
index 16539b1..6db5a3e 100644
--- a/arch/m68k/Kconfig.mmu
+++ b/arch/m68k/Kconfig.mmu
@@ -399,6 +399,7 @@ config ISA
bool
depends on Q40 || AMIGA_PCMCIA
default y
+ select PARPORT_PC
help
Find out whether you have ISA slots on your motherboard. ISA is the
name of a bus system, i.e. the way the CPU talks to the other stuff
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index e446bab..ceac9b5 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -15,6 +15,7 @@ config MICROBLAZE
select OF
select OF_EARLY_FLATTREE
select HAVE_GENERIC_HARDIRQS
+ select HAVE_PC_PARPORT
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 653da62..51170ba 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -39,6 +39,7 @@ config MIPS_ALCHEMY
select 64BIT_PHYS_ADDR
select CEVT_R4K_LIB
select CSRC_R4K_LIB
+ select HAVE_PC_PARPORT
select IRQ_CPU
select SYS_HAS_CPU_MIPS32_R1
select SYS_SUPPORTS_32BIT_KERNEL
@@ -127,6 +128,7 @@ config MIPS_COBALT
select CSRC_R4K
select CEVT_GT641XX
select DMA_NONCOHERENT
+ select HAVE_PC_PARPORT
select HW_HAS_PCI
select I8253
select I8259
@@ -185,6 +187,7 @@ config MACH_JAZZ
select CSRC_R4K
select DEFAULT_SGI_PARTITION if CPU_BIG_ENDIAN
select GENERIC_ISA_DMA
+ select HAVE_PC_PARPORT
select IRQ_CPU
select I8253
select I8259
@@ -266,6 +269,7 @@ config MIPS_MALTA
select CSRC_R4K
select DMA_NONCOHERENT
select GENERIC_ISA_DMA
+ select HAVE_PC_PARPORT
select IRQ_CPU
select IRQ_GIC
select HW_HAS_PCI
@@ -421,6 +425,7 @@ config SGI_IP22
select CSRC_R4K
select DEFAULT_SGI_PARTITION
select DMA_NONCOHERENT
+ select HAVE_PC_PARPORT
select HW_HAS_EISA
select I8253
select I8259
@@ -483,6 +488,7 @@ config SGI_IP28
select DEFAULT_SGI_PARTITION
select DMA_NONCOHERENT
select GENERIC_ISA_DMA_SUPPORT_BROKEN
+ select HAVE_PC_PARPORT
select IRQ_CPU
select HW_HAS_EISA
select I8253
@@ -517,6 +523,7 @@ config SGI_IP32
select CEVT_R4K
select CSRC_R4K
select DMA_NONCOHERENT
+ select HAVE_PC_PARPORT
select HW_HAS_PCI
select IRQ_CPU
select R5000_CPU_SCACHE
@@ -535,6 +542,7 @@ config SIBYTE_CRHINE
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
+ select HAVE_PC_PARPORT
select SIBYTE_BCM1120
select SWAP_IO_SPACE
select SYS_HAS_CPU_SB1
@@ -546,6 +554,7 @@ config SIBYTE_CARMEL
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
+ select HAVE_PC_PARPORT
select SIBYTE_BCM1120
select SWAP_IO_SPACE
select SYS_HAS_CPU_SB1
@@ -557,6 +566,7 @@ config SIBYTE_CRHONE
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
+ select HAVE_PC_PARPORT
select SIBYTE_BCM1125
select SWAP_IO_SPACE
select SYS_HAS_CPU_SB1
@@ -569,6 +579,7 @@ config SIBYTE_RHONE
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
+ select HAVE_PC_PARPORT
select SIBYTE_BCM1125H
select SWAP_IO_SPACE
select SYS_HAS_CPU_SB1
@@ -580,6 +591,7 @@ config SIBYTE_SWARM
select BOOT_ELF32
select DMA_COHERENT
select HAVE_PATA_PLATFORM
+ select HAVE_PC_PARPORT
select NR_CPUS_DEFAULT_2
select SIBYTE_SB1250
select SWAP_IO_SPACE
@@ -595,6 +607,7 @@ config SIBYTE_LITTLESUR
select BOOT_ELF32
select DMA_COHERENT
select HAVE_PATA_PLATFORM
+ select HAVE_PC_PARPORT
select NR_CPUS_DEFAULT_2
select SIBYTE_SB1250
select SWAP_IO_SPACE
@@ -608,6 +621,7 @@ config SIBYTE_SENTOSA
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
+ select HAVE_PC_PARPORT
select NR_CPUS_DEFAULT_2
select SIBYTE_SB1250
select SWAP_IO_SPACE
@@ -619,6 +633,7 @@ config SIBYTE_BIGSUR
bool "Sibyte BCM91480B-BigSur"
select BOOT_ELF32
select DMA_COHERENT
+ select HAVE_PC_PARPORT
select NR_CPUS_DEFAULT_4
select SIBYTE_BCM1x80
select SWAP_IO_SPACE
@@ -640,6 +655,7 @@ config SNI_RM
select DEFAULT_SGI_PARTITION if CPU_BIG_ENDIAN
select DMA_NONCOHERENT
select GENERIC_ISA_DMA
+ select HAVE_PC_PARPORT
select HW_HAS_EISA
select HW_HAS_PCI
select IRQ_CPU
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index 65adc86..1be72d9 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -13,6 +13,7 @@ config PARISC
select HAVE_PERF_EVENTS
select GENERIC_ATOMIC64 if !64BIT
select HAVE_GENERIC_HARDIRQS
+ select HAVE_PC_PARPORT
select GENERIC_IRQ_PROBE
select IRQ_PER_CPU
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 2729c66..b8328df 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -128,6 +128,7 @@ config PPC
select HAVE_REGS_AND_STACK_ACCESS_API
select HAVE_HW_BREAKPOINT if PERF_EVENTS && PPC_BOOK3S_64
select HAVE_GENERIC_HARDIRQS
+ select HAVE_PC_PARPORT
select HAVE_SPARSE_IRQ
select IRQ_PER_CPU
select GENERIC_IRQ_SHOW
diff --git a/arch/score/Kconfig b/arch/score/Kconfig
index 288add8..ba078d0 100644
--- a/arch/score/Kconfig
+++ b/arch/score/Kconfig
@@ -1,9 +1,10 @@
menu "Machine selection"
config SCORE
- def_bool y
- select HAVE_GENERIC_HARDIRQS
- select GENERIC_IRQ_SHOW
+ def_bool y
+ select HAVE_GENERIC_HARDIRQS
+ select HAVE_PC_PARPORT
+ select GENERIC_IRQ_SHOW
choice
prompt "System type"
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index f03338c..daa65f3 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -20,6 +20,7 @@ config SUPERH
select HAVE_SYSCALL_TRACEPOINTS
select HAVE_REGS_AND_STACK_ACCESS_API
select HAVE_GENERIC_HARDIRQS
+ select HAVE_PC_PARPORT
select HAVE_SPARSE_IRQ
select IRQ_FORCED_THREADING
select RTC_LIB
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 253986b..3679d7c 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -520,6 +520,7 @@ config PCI
CONFIG_PCI is needed for all JavaStation's (including MrCoffee),
CP-1200, JavaEngine-1, Corona, Red October, and Serengeti SGSC.
All of these platforms are extremely obscure, so say N if unsure.
+ select HAVE_PC_PARPORT if SPARC64
config PCI_DOMAINS
def_bool PCI if SPARC64
diff --git a/arch/tile/Kconfig b/arch/tile/Kconfig
index 0249b8b..3e96eff 100644
--- a/arch/tile/Kconfig
+++ b/arch/tile/Kconfig
@@ -8,6 +8,7 @@ config TILE
select USE_GENERIC_SMP_HELPERS
select CC_OPTIMIZE_FOR_SIZE
select HAVE_GENERIC_HARDIRQS
+ select HAVE_PC_PARPORT
select GENERIC_IRQ_PROBE
select GENERIC_PENDING_IRQ if SMP
select GENERIC_IRQ_SHOW
diff --git a/arch/unicore32/Kconfig b/arch/unicore32/Kconfig
index e57dcce..3832e7e 100644
--- a/arch/unicore32/Kconfig
+++ b/arch/unicore32/Kconfig
@@ -8,6 +8,7 @@ config UNICORE32
select HAVE_KERNEL_BZIP2
select HAVE_KERNEL_LZO
select HAVE_KERNEL_LZMA
+ select HAVE_PC_PARPORT
select GENERIC_FIND_FIRST_BIT
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index da34972..750f584 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -70,6 +70,7 @@ config X86
select IRQ_FORCED_THREADING
select USE_GENERIC_SMP_HELPERS if SMP
select HAVE_BPF_JIT if (X86_64 && NET)
+ select HAVE_PC_PARPORT
config INSTRUCTION_DECODER
def_bool (KPROBES || PERF_EVENTS)
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 5d43c1f..d4c3040 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -8,6 +8,7 @@ config XTENSA
def_bool y
select HAVE_IDE
select HAVE_GENERIC_HARDIRQS
+ select HAVE_PC_PARPORT
select GENERIC_IRQ_SHOW
help
Xtensa processors are 32-bit RISC machines designed by Tensilica
diff --git a/drivers/parport/Kconfig b/drivers/parport/Kconfig
index d92185a..095a8c7 100644
--- a/drivers/parport/Kconfig
+++ b/drivers/parport/Kconfig
@@ -35,8 +35,7 @@ if PARPORT
config PARPORT_PC
tristate "PC-style hardware"
- depends on (!SPARC64 || PCI) && !SPARC32 && !M32R && !FRV && \
- (!M68K || ISA) && !MN10300 && !AVR32 && !BLACKFIN
+ depends on HAVE_PC_PARPORT
---help---
You should say Y here if you have a PC-style parallel port. All
IBM PC compatible computers and some Alphas have PC-style
@@ -48,6 +47,9 @@ config PARPORT_PC
If unsure, say Y.
+config HAVE_PC_PARPORT
+ bool
+
config PARPORT_SERIAL
tristate "Multi-IO cards (parallel and serial)"
depends on SERIAL_8250_PCI && PARPORT_PC && PCI
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
