Add the following options to the mpc5200_defconfig, needed for the a4m072 board support:
CONFIG_AMD_PHY=y CONFIG_MTD_PLATRAM=y -> this deletes CONFIG_MTD_RAM=y CONFIG_GPIO_SYSFS=y CONFIG_SENSORS_LM87=m CONFIG_RTC_DRV_PCF8563=m Signed-off-by: Heiko Schocher <h...@denx.de> cc: Wolfgang Denk <w...@denx.de> --- arch/powerpc/configs/mpc5200_defconfig | 6 +++++- 1 files changed, 5 insertions(+), 1 deletions(-) diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig index b3e27f6..1e64591 100644 --- a/arch/powerpc/configs/mpc5200_defconfig +++ b/arch/powerpc/configs/mpc5200_defconfig @@ -39,9 +39,9 @@ CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_AMDSTD=y -CONFIG_MTD_RAM=y CONFIG_MTD_ROM=y CONFIG_MTD_PHYSMAP_OF=y +CONFIG_MTD_PLATRAM=y CONFIG_MTD_UBI=m CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y @@ -56,6 +56,7 @@ CONFIG_ATA=y CONFIG_PATA_MPC52xx=y CONFIG_PATA_PLATFORM=y CONFIG_NETDEVICES=y +CONFIG_AMD_PHY=y CONFIG_LXT_PHY=y CONFIG_NET_ETHERNET=y CONFIG_FEC_MPC52xx=y @@ -75,6 +76,8 @@ CONFIG_SPI_GPIO=m CONFIG_SPI_MPC52xx=m CONFIG_SPI_MPC52xx_PSC=m CONFIG_SPI_SPIDEV=m +CONFIG_GPIO_SYSFS=y +CONFIG_SENSORS_LM87=m CONFIG_WATCHDOG=y CONFIG_DRM=y CONFIG_VIDEO_OUTPUT_CONTROL=y @@ -107,6 +110,7 @@ CONFIG_USB_STORAGE=y CONFIG_NEW_LEDS=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_DS1307=y +CONFIG_RTC_DRV_PCF8563=m CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set -- 1.7.5.4 _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
