On Jun 7, 2011, at 9:49 PM, Prabhakar Kushwaha wrote: > ten-bit interface (TBI) module is part of SoC not board. > > Move tbi entries from board related dts files to Si dts. > > Signed-off-by: Prabhakar Kushwaha <prabha...@freescale.com> > --- > Based upon http://git.kernel.org/pub/scm/linux/kernel/git/galak/powerpc.git > (branch next) > > arch/powerpc/boot/dts/p1020rdb.dts | 9 --------- > arch/powerpc/boot/dts/p1020rdb_camp_core0.dts | 8 -------- > arch/powerpc/boot/dts/p1020si.dtsi | 6 +++++- > arch/powerpc/boot/dts/p2020rdb.dts | 8 -------- > arch/powerpc/boot/dts/p2020rdb_camp_core0.dts | 8 -------- > arch/powerpc/boot/dts/p2020si.dtsi | 6 +++++- > 6 files changed, 10 insertions(+), 35 deletions(-) > > diff --git a/arch/powerpc/boot/dts/p1020rdb.dts > b/arch/powerpc/boot/dts/p1020rdb.dts > index d6a8ae4..a4e5d6c 100644 > --- a/arch/powerpc/boot/dts/p1020rdb.dts > +++ b/arch/powerpc/boot/dts/p1020rdb.dts > @@ -211,14 +211,6 @@ > }; > }; > > - mdio@25000 { > - > - tbi0: tbi-phy@11 { > - reg = <0x11>; > - device_type = "tbi-phy"; > - }; > - }; > - > enet0: ethernet@b0000 { > fixed-link = <1 1 1000 0 0>; > phy-connection-type = "rgmii-id"; > @@ -227,7 +219,6 @@ > > enet1: ethernet@b1000 { > phy-handle = <&phy0>; > - tbi-handle = <&tbi0>; > phy-connection-type = "sgmii"; > > };
I'm not sure we should do this. The phy address we pick is board specific so it should NOT be in .dtsi - k _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
