If CONFIG_PHYS_ADDR_T_64BIT is set, compilation of sbc8560 fails with
the following error:
arch/powerpc/platforms/85xx/sbc8560.c: In function ‘sbc8560_bdrstcr_init’:
arch/powerpc/platforms/85xx/sbc8560.c:286: error: format ‘%x’ expects type
‘unsigned int’, but argument 2 has type ‘resource_size_t’
Fix that by using %pR format instead of just printing the start of
resource.
Signed-off-by: Dmitry Eremin-Solenikov <dbarysh...@gmail.com>
---
arch/powerpc/platforms/85xx/sbc8560.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/arch/powerpc/platforms/85xx/sbc8560.c
b/arch/powerpc/platforms/85xx/sbc8560.c
index d2dfd46..678f5a8 100644
--- a/arch/powerpc/platforms/85xx/sbc8560.c
+++ b/arch/powerpc/platforms/85xx/sbc8560.c
@@ -283,7 +283,7 @@ static int __init sbc8560_bdrstcr_init(void)
of_address_to_resource(np, 0, &res);
- printk(KERN_INFO "sbc8560: Found BRSTCR at i/o 0x%x\n", res.start);
+ printk(KERN_INFO "sbc8560: Found BRSTCR at %pR\n", &res);
brstcr = ioremap(res.start, res.end - res.start);
if(!brstcr)
--
1.7.2.5
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
