Hi Robin, On 08/10/2011 05:06 AM, Robin Holt wrote: > In working with the socketcan developers, we have come to the conclusion > the Documentation...fsl-flexcan.txt device tree documentation needs to > be cleaned up. The driver does not depend upon any properties other
Your first sentence could be misleading. Please just describe what the patch does and why, something like: "This patch cleans up the documentation of the device-tree binding for the Flexcan devices on Freescale's PowerPC and ARM cores. Extra properties are not needed as the frequency of the source clock is fixed..." and so on. > than the required properties so we are removing the file. Additionally, > the p1010*dts* files are not following the standard for node naming in > that they have a trailing -v1.0. > Signed-off-by: Robin Holt <h...@sgi.com> > To: Marc Kleine-Budde <m...@pengutronix.de>, > To: Wolfgang Grandegger <w...@grandegger.com>, > To: U Bhaskar-B22300 <b22...@freescale.com> > To: Scott Wood <scottw...@freescale.com> > Cc: socketcan-c...@lists.berlios.de, > Cc: net...@vger.kernel.org, > Cc: PPC list <linuxppc-dev@lists.ozlabs.org> > Cc: Kumar Gala <ga...@kernel.crashing.org> > --- > .../devicetree/bindings/net/can/fsl-flexcan.txt | 61 > -------------------- > arch/powerpc/boot/dts/p1010rdb.dts | 8 --- > arch/powerpc/boot/dts/p1010si.dtsi | 8 +- > 3 files changed, 4 insertions(+), 73 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/net/can/fsl-flexcan.txt > > diff --git a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt > b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt > deleted file mode 100644 > index 1a729f0..0000000 > --- a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt > +++ /dev/null > @@ -1,61 +0,0 @@ > -CAN Device Tree Bindings > ------------------------- > -2011 Freescale Semiconductor, Inc. > - > -fsl,flexcan-v1.0 nodes > ------------------------ > -In addition to the required compatible-, reg- and interrupt-properties, you > can > -also specify which clock source shall be used for the controller. > - > -CPI Clock- Can Protocol Interface Clock > - This CLK_SRC bit of CTRL(control register) selects the clock source to > - the CAN Protocol Interface(CPI) to be either the peripheral clock > - (driven by the PLL) or the crystal oscillator clock. The selected clock > - is the one fed to the prescaler to generate the Serial Clock (Sclock). > - The PRESDIV field of CTRL(control register) controls a prescaler that > - generates the Serial Clock (Sclock), whose period defines the > - time quantum used to compose the CAN waveform. > - > -Can Engine Clock Source > - There are two sources for CAN clock > - - Platform Clock It represents the bus clock > - - Oscillator Clock > - > - Peripheral Clock (PLL) > - -------------- > - | > - --------- ------------- > - | |CPI Clock | Prescaler | Sclock > - | |---------------->| (1.. 256) |------------> > - --------- ------------- > - | | > - -------------- ---------------------CLK_SRC > - Oscillator Clock > - > -- fsl,flexcan-clock-source : CAN Engine Clock Source.This property selects > - the peripheral clock. PLL clock is fed to the > - prescaler to generate the Serial Clock (Sclock). > - Valid values are "oscillator" and "platform" > - "oscillator": CAN engine clock source is > oscillator clock. > - "platform" The CAN engine clock source is the bus > clock > - (platform clock). > - > -- fsl,flexcan-clock-divider : for the reference and system clock, an > additional > - clock divider can be specified. > -- clock-frequency: frequency required to calculate the bitrate for FlexCAN. > - > -Note: > - - v1.0 of flexcan-v1.0 represent the IP block version for P1010 SOC. > - - P1010 does not have oscillator as the Clock Source.So the default > - Clock Source is platform clock. > -Examples: > - > - can0@1c000 { > - compatible = "fsl,flexcan-v1.0"; > - reg = <0x1c000 0x1000>; > - interrupts = <48 0x2>; > - interrupt-parent = <&mpic>; > - fsl,flexcan-clock-source = "platform"; > - fsl,flexcan-clock-divqider = <2>; > - clock-frequency = <fixed by u-boot>; > - }; Do we really want to drop the documentation for that binding. I think something like the following text would be still useful: ------------------------ Flexcan CAN contoller on Freescale's ARM and PowerPC processors Required properties: - compatible : Should be "fsl,flexcan" and optionally "fsl,flexcan-<processor>" - reg : Offset and length of the register set for this device - interrupts : Interrupt tuple for this device Example: can@1c000 { compatible = "fsl,p1010-flexcan", "fsl,flexcan"; reg = <0x1c000 0x1000>; interrupts = <48 0x2>; interrupt-parent = <&mpic>; }; ------------------------- What do you think? > diff --git a/arch/powerpc/boot/dts/p1010rdb.dts > b/arch/powerpc/boot/dts/p1010rdb.dts > index 6b33b73..d6a0bb2 100644 > --- a/arch/powerpc/boot/dts/p1010rdb.dts > +++ b/arch/powerpc/boot/dts/p1010rdb.dts > @@ -169,14 +169,6 @@ > }; > }; > > - can0@1c000 { > - fsl,flexcan-clock-source = "platform"; > - }; > - > - can1@1d000 { > - fsl,flexcan-clock-source = "platform"; > - }; > - > usb@22000 { > phy_type = "utmi"; > }; > diff --git a/arch/powerpc/boot/dts/p1010si.dtsi > b/arch/powerpc/boot/dts/p1010si.dtsi > index 7f51104..20c396d 100644 > --- a/arch/powerpc/boot/dts/p1010si.dtsi > +++ b/arch/powerpc/boot/dts/p1010si.dtsi > @@ -141,19 +141,19 @@ > }; > > can0@1c000 { > - compatible = "fsl,flexcan-v1.0"; > + compatible = "fsl,p1010-flexcan", > + "fsl,flexcan"; Does fit on one line. > reg = <0x1c000 0x1000>; > interrupts = <48 0x2>; > interrupt-parent = <&mpic>; > - fsl,flexcan-clock-divider = <2>; > }; > > can1@1d000 { > - compatible = "fsl,flexcan-v1.0"; > + compatible = "fsl,p1010-flexcan", > + "fsl,flexcan"; Ditto > reg = <0x1d000 0x1000>; > interrupts = <61 0x2>; > interrupt-parent = <&mpic>; > - fsl,flexcan-clock-divider = <2>; > }; > > L2: l2-cache-controller@20000 { Please also correct the node names (not using the number suffix). Wolfgang. _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev