On Thu, 2011-12-01 at 10:41 +0100, Wolfgang Grandegger wrote:
> This patch enables or updates support for the CC770 and AN82527
> CAN controller on the TQM8548 and TQM8xx boards.

I'm a bit confused by the net-next prefix here. Those patches seem to
be only touching arch/powerpc and seem to be sent primarily toward
netdev with a net-next prefix.

Also there have been at least 3 versions in a couple of days already
without comments nor indication of what was changed...

Can you clarify things a bit please ? It looks like they really should
go to linuxppc-dev (and you can probably drop a bunch of other lists) or
am I missing an important piece of the puzzle ? (Such as patch 1/4 and
2/4 ...)

Let me know if I should just remove them from powerpc patchwork.

Cheers,
Ben.

> CC: devicetree-disc...@lists.ozlabs.org
> CC: linuxppc-...@ozlabs.org
> CC: Kumar Gala <ga...@kernel.crashing.org>
> Signed-off-by: Wolfgang Grandegger <w...@grandegger.com>
> ---
>  arch/powerpc/boot/dts/tqm8548-bigflash.dts |   19 ++++++++++++++-----
>  arch/powerpc/boot/dts/tqm8548.dts          |   19 ++++++++++++++-----
>  arch/powerpc/boot/dts/tqm8xx.dts           |   25 +++++++++++++++++++++++++
>  3 files changed, 53 insertions(+), 10 deletions(-)
> 
> diff --git a/arch/powerpc/boot/dts/tqm8548-bigflash.dts 
> b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
> index 9452c3c..d918752 100644
> --- a/arch/powerpc/boot/dts/tqm8548-bigflash.dts
> +++ b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
> @@ -352,7 +352,7 @@
>               ranges = <
>                       0 0x0 0xfc000000 0x04000000     // NOR FLASH bank 1
>                       1 0x0 0xf8000000 0x08000000     // NOR FLASH bank 0
> -                     2 0x0 0xa3000000 0x00008000     // CAN (2 x i82527)
> +                     2 0x0 0xa3000000 0x00008000     // CAN (2 x CC770)
>                       3 0x0 0xa3010000 0x00008000     // NAND FLASH
>  
>               >;
> @@ -393,18 +393,27 @@
>               };
>  
>               /* Note: CAN support needs be enabled in U-Boot */
> -             can0@2,0 {
> -                     compatible = "intel,82527"; // Bosch CC770
> +             can@2,0 {
> +                     compatible = "bosch,cc770"; // Bosch CC770
>                       reg = <2 0x0 0x100>;
>                       interrupts = <4 1>;
>                       interrupt-parent = <&mpic>;
> +                     bosch,external-clock-frequency = <16000000>;
> +                     bosch,disconnect-rx1-input;
> +                     bosch,disconnect-tx1-output;
> +                     bosch,iso-low-speed-mux;
> +                     bosch,clock-out-frequency = <16000000>;
>               };
>  
> -             can1@2,100 {
> -                     compatible = "intel,82527"; // Bosch CC770
> +             can@2,100 {
> +                     compatible = "bosch,cc770"; // Bosch CC770
>                       reg = <2 0x100 0x100>;
>                       interrupts = <4 1>;
>                       interrupt-parent = <&mpic>;
> +                     bosch,external-clock-frequency = <16000000>;
> +                     bosch,disconnect-rx1-input;
> +                     bosch,disconnect-tx1-output;
> +                     bosch,iso-low-speed-mux;
>               };
>  
>               /* Note: NAND support needs to be enabled in U-Boot */
> diff --git a/arch/powerpc/boot/dts/tqm8548.dts 
> b/arch/powerpc/boot/dts/tqm8548.dts
> index 619776f..988d887 100644
> --- a/arch/powerpc/boot/dts/tqm8548.dts
> +++ b/arch/powerpc/boot/dts/tqm8548.dts
> @@ -352,7 +352,7 @@
>               ranges = <
>                       0 0x0 0xfc000000 0x04000000     // NOR FLASH bank 1
>                       1 0x0 0xf8000000 0x08000000     // NOR FLASH bank 0
> -                     2 0x0 0xe3000000 0x00008000     // CAN (2 x i82527)
> +                     2 0x0 0xe3000000 0x00008000     // CAN (2 x CC770)
>                       3 0x0 0xe3010000 0x00008000     // NAND FLASH
>  
>               >;
> @@ -393,18 +393,27 @@
>               };
>  
>               /* Note: CAN support needs be enabled in U-Boot */
> -             can0@2,0 {
> -                     compatible = "intel,82527"; // Bosch CC770
> +             can@2,0 {
> +                     compatible = "bosch,cc770"; // Bosch CC770
>                       reg = <2 0x0 0x100>;
>                       interrupts = <4 1>;
>                       interrupt-parent = <&mpic>;
> +                     bosch,external-clock-frequency = <16000000>;
> +                     bosch,disconnect-rx1-input;
> +                     bosch,disconnect-tx1-output;
> +                     bosch,iso-low-speed-mux;
> +                     bosch,clock-out-frequency = <16000000>;
>               };
>  
> -             can1@2,100 {
> -                     compatible = "intel,82527"; // Bosch CC770
> +             can@2,100 {
> +                     compatible = "bosch,cc770"; // Bosch CC770
>                       reg = <2 0x100 0x100>;
>                       interrupts = <4 1>;
>                       interrupt-parent = <&mpic>;
> +                     bosch,external-clock-frequency = <16000000>;
> +                     bosch,disconnect-rx1-input;
> +                     bosch,disconnect-tx1-output;
> +                     bosch,iso-low-speed-mux;
>               };
>  
>               /* Note: NAND support needs to be enabled in U-Boot */
> diff --git a/arch/powerpc/boot/dts/tqm8xx.dts 
> b/arch/powerpc/boot/dts/tqm8xx.dts
> index f6da7ec..c3dba25 100644
> --- a/arch/powerpc/boot/dts/tqm8xx.dts
> +++ b/arch/powerpc/boot/dts/tqm8xx.dts
> @@ -57,6 +57,7 @@
>  
>               ranges = <
>                       0x0 0x0 0x40000000 0x800000
> +                     0x3 0x0 0xc0000000 0x200
>               >;
>  
>               flash@0,0 {
> @@ -67,6 +68,30 @@
>                       bank-width = <4>;
>                       device-width = <2>;
>               };
> +
> +             /* Note: CAN support needs be enabled in U-Boot */
> +             can@3,0 {
> +                     compatible = "intc,82527";
> +                     reg = <3 0x0 0x80>;
> +                     interrupts = <8 1>;
> +                     interrupt-parent = <&PIC>;
> +                     bosch,external-clock-frequency = <16000000>;
> +                     bosch,disconnect-rx1-input;
> +                     bosch,disconnect-tx1-output;
> +                     bosch,iso-low-speed-mux;
> +                     bosch,clock-out-frequency = <16000000>;
> +             };
> +
> +             can@3,100 {
> +                     compatible = "intc,82527";
> +                     reg = <3 0x100 0x80>;
> +                     interrupts = <8 1>;
> +                     interrupt-parent = <&PIC>;
> +                     bosch,external-clock-frequency = <16000000>;
> +                     bosch,disconnect-rx1-input;
> +                     bosch,disconnect-tx1-output;
> +                     bosch,iso-low-speed-mux;
> +             };
>       };
>  
>       soc@fff00000 {


_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev

Reply via email to