On Mon, 12 Dec 2011, Benjamin Herrenschmidt wrote:
> Any chance you can test this patch ? I would not be surprised if it
> broke m68k since I had to do some of the changes in there "blind", so
> let me know... with this, I can again suspend/resume properly on a Pismo
> while using the internal modem among other things.
The patch works on a PowerBook 520 given a few changes (below). This
PowerBook only has one serial port that I can test (the internal modem is
not supported on 68k Macs). Can you test a machine with two ports? The
rest of my Mac hardware is in storage since I moved house last week.
Finn
Index: linux-git/drivers/tty/serial/pmac_zilog.c
===================================================================
--- linux-git.orig/drivers/tty/serial/pmac_zilog.c 2011-12-13
00:18:02.000000000 +1100
+++ linux-git/drivers/tty/serial/pmac_zilog.c 2011-12-13 00:23:55.000000000
+1100
@@ -1705,8 +1705,8 @@ static int __init pmz_init_port(struct u
struct resource *r_ports;
int irq;
- r_ports = platform_get_resource(uap->node, IORESOURCE_MEM, 0);
- irq = platform_get_irq(uap->node, 0);
+ r_ports = platform_get_resource(uap->pdev, IORESOURCE_MEM, 0);
+ irq = platform_get_irq(uap->pdev, 0);
if (!r_ports || !irq)
return -ENODEV;
@@ -1763,8 +1763,10 @@ static void pmz_dispose_port(struct uart
static int __init pmz_attach(struct platform_device *pdev)
{
+ struct uart_pmac_port *uap;
int i;
+ /* Iterate the pmz_ports array to find a matching entry */
for (i = 0; i < pmz_ports_count; i++)
if (pmz_ports[i].pdev == pdev)
break;
@@ -1773,15 +1775,23 @@ static int __init pmz_attach(struct plat
uap = &pmz_ports[i];
uap->port.dev = &pdev->dev;
- dev_set_drvdata(&mdev->ofdev.dev, uap);
+ platform_set_drvdata(pdev, uap);
- return uart_add_one_port(&pmz_uart_reg,
- &pmz_ports[i]->port);
+ return uart_add_one_port(&pmz_uart_reg, &uap->port);
}
static int __exit pmz_detach(struct platform_device *pdev)
{
+ struct uart_pmac_port *uap = platform_get_drvdata(pdev);
+
+ if (!uap)
+ return -ENODEV;
+
uart_remove_one_port(&pmz_uart_reg, &uap->port);
+
+ platform_set_drvdata(pdev, NULL);
+ uap->port.dev = NULL;
+
return 0;
}
@@ -1918,8 +1928,13 @@ static void __exit exit_pmz(void)
for (i = 0; i < pmz_ports_count; i++) {
struct uart_pmac_port *uport = &pmz_ports[i];
+#ifdef CONFIG_PPC_PMAC
if (uport->node != NULL)
pmz_dispose_port(uport);
+#else
+ if (uport->pdev != NULL)
+ pmz_dispose_port(uport);
+#endif
}
/* Unregister UART driver */
uart_unregister_driver(&pmz_uart_reg);
@@ -1993,6 +2008,9 @@ static int __init pmz_console_setup(stru
#ifdef CONFIG_PPC_PMAC
if (uap->node == NULL)
return -ENODEV;
+#else
+ if (uap->pdev == NULL)
+ return -ENODEV;
#endif
port = &uap->port;
Index: linux-git/drivers/tty/serial/pmac_zilog.h
===================================================================
--- linux-git.orig/drivers/tty/serial/pmac_zilog.h 2011-12-13
00:18:02.000000000 +1100
+++ linux-git/drivers/tty/serial/pmac_zilog.h 2011-12-13 00:23:55.000000000
+1100
@@ -1,18 +1,9 @@
#ifndef __PMAC_ZILOG_H__
#define __PMAC_ZILOG_H__
-#ifdef CONFIG_PPC_PMAC
-/* We cannot use dev_* because this can be called early, way before
- * we are matched with a device (when using it as a kernel console)
- */
#define pmz_debug(fmt, arg...) pr_debug("ttyPZ%d: " fmt, uap->port.line, ##
arg)
#define pmz_error(fmt, arg...) pr_err("ttyPZ%d: " fmt, uap->port.line, ## arg)
#define pmz_info(fmt, arg...) pr_info("ttyPZ%d: " fmt, uap->port.line, ## arg)
-#else
-#define pmz_debug(fmt, arg...) dev_dbg(&uap->node->dev, fmt, ## arg)
-#define pmz_error(fmt, arg...) dev_err(&uap->node->dev, fmt, ## arg)
-#define pmz_info(fmt, arg...) dev_info(&uap->node->dev, fmt, ## arg)
-#endif
/*
* At most 2 ESCCs with 2 ports each
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
