Remove the "select PHYS_64BIT" from the Kconfig entry for the P1022DS,
so that large physical address support is a selectable option for non-CoreNet
reference boards.

The option is enabled in mpc85xx_[smp_]defconfig so that the default is
unchanged.  However, now it can be deselected.

The P1022DS had this option defined because the default device tree for
this board uses 36-bit addresses.  This had the side-effect of forcing
this option on for all boards that use mpc85xx_[smp_]defconfig.  Some
users may want to disable this feature to create an optimized configuration
for boards with <= 2GB of RAM.

Signed-off-by: Timur Tabi <ti...@freescale.com>
---
 arch/powerpc/configs/mpc85xx_defconfig     |    1 +
 arch/powerpc/configs/mpc85xx_smp_defconfig |    1 +
 arch/powerpc/platforms/85xx/Kconfig        |    1 -
 3 files changed, 2 insertions(+), 1 deletions(-)

diff --git a/arch/powerpc/configs/mpc85xx_defconfig 
b/arch/powerpc/configs/mpc85xx_defconfig
index f37a2ab..5fb0c8a 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -1,4 +1,5 @@
 CONFIG_PPC_85xx=y
+CONFIG_PHYS_64BIT=y
 CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_POSIX_MQUEUE=y
diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig 
b/arch/powerpc/configs/mpc85xx_smp_defconfig
index abdcd31..fb51bc9 100644
--- a/arch/powerpc/configs/mpc85xx_smp_defconfig
+++ b/arch/powerpc/configs/mpc85xx_smp_defconfig
@@ -1,4 +1,5 @@
 CONFIG_PPC_85xx=y
+CONFIG_PHYS_64BIT=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=8
 CONFIG_EXPERIMENTAL=y
diff --git a/arch/powerpc/platforms/85xx/Kconfig 
b/arch/powerpc/platforms/85xx/Kconfig
index d7946be..93d27e2 100644
--- a/arch/powerpc/platforms/85xx/Kconfig
+++ b/arch/powerpc/platforms/85xx/Kconfig
@@ -80,7 +80,6 @@ config P1010_RDB
 config P1022_DS
        bool "Freescale P1022 DS"
        select DEFAULT_UIMAGE
-       select PHYS_64BIT       # The DTS has 36-bit addresses
        select SWIOTLB
        help
          This option enables support for the Freescale P1022DS reference board.
-- 
1.7.3.4


_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev

Reply via email to