Jean Delvare <kh...@linux-fr.org> wrote: >On Thu, 19 Apr 2012 18:16:41 +1000, Benjamin Herrenschmidt wrote: >> The goal of this series is to convert a bulk of PowerMac i2c drivers >> to the new "proper" i2c driver registration model. This series is >> not complete in that there are still a few drivers to do but it >> goes through the bulk of thermal control and some of the nastiest. >> >> The biggest change is that windfarm is ported to generally use >> the new model, and I've written a new set of windfarm modules to >> take over from the old therm_pm72 (which was mostly unfixable) >> on the PowerMac G5 AGP and Xserve G5 machines. >> >> This had a bit of testing on a couple of PowerMac G5 AGP variants >> but none at all on Xserve G5 since the one I have is unfortunately >> dead. >> >> If you want to help me test this, don't forget to disable therm_pm72, >> and instead load windfarm_pm72 or windfarm_rm31 depending on your >> machine (you can load or build-in the whole lot as well). As usual >> windfarm don't properly auto-load yet, I still need to fix that. >> >> So please test ! Especially if you have an XServe G5 > >Benjamin, thanks a lot for doing this! These drivers were the last ones >blocking the removal of the legacy binding model in i2c-core. Testers >are very welcome. The earliest we can get these changes upstream, the >better. > >Christian, can you please test this series? I'm sure Benjamin can send >the patches to you directly if needed. > >-- >Jean Delvare
I may need a day or two to get to it, but I'll test it. Thanks, C. -- make bzImage, not war _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev