On Wed, 2012-05-23 at 16:37 -0600, Bjorn Helgaas wrote:
> From: Hiroo Matsumoto <matsumoto.hi...@jp.fujitsu.com>
> 
> PowerPC initialized DMA and IRQ information in the pci_scan_child_bus()
> -> pcibios_fixup_bus() path.  Some hotplug drivers use that path, but
> others don't, e.g., pciehp, so sometimes hot-added devices are only
> partly initialized.
> 
> This patch moves that initialization from pcibios_fixup_bus() to a new
> pci_bus_notify() called in the pci_bus_add_device() -> device_add() path.
> That means the initialization happens the same way for all PCI devices,
> whether they are present at boot or hot-added later.
> 
> Note that powerpc was the only user of pci_fixup_cardbus(), which was
> used to do this same setup for cardbus devices.  That's no longer
> needed because this setup will now be done in the same device_add()
> notification path as all other PCI devices.

Hrm. That will require a good deal of testing... Unfortunately I'm out
for a few weeks getting some surgery and then recovering...

Our PCI code has ancient roots and I wouldn't be surprised if that
change breaks subtle assumptions made here or there, we'd need to test
at least on a good range of macs and ibm hotplug stuff.

Cheers,
Ben.

> Typical failure of a hot-added e1000e device prior to this change:
> 
>     # echo 1 > /sys/bus/pci/slots/1/power
>     <snip>
>     e1000e 0000:03:00.0: enabling device (0000 -> 0002)
>     e1000e 0000:03:00.0: No usable DMA configuration, aborting
>     e1000e: probe of 0000:03:00.0 failed with error -5
> 
> Successful initialization after this change:
> 
>     # echo 1 > /sys/bus/pci/slots/1/power
>     <snip>
>     e1000e 0000:03:00.0: enabling device (0000 -> 0002)
>     irq: irq 6 on host /soc@ffe00000/msi@41600 mapped to virtual irq 27
>     e1000e 0000:03:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 
> 00:15:17:bf:c0:c9
>     e1000e 0000:03:00.0: eth0: Intel(R) PRO/1000 Network Connection
>     e1000e 0000:03:00.0: eth0: MAC: 1, PHY: 4, PBA No: D50861-003
> 
> [bhelgaas: changelog, notifier name, registration can be __init]
> CC: Dominik Brodowski <li...@dominikbrodowski.net>
> Signed-off-by: Hiroo MATSUMOTO <matsumoto.hi...@jp.fujitsu.com>
> Signed-off-by: Bjorn Helgaas <bhelg...@google.com>
> ---
>  arch/powerpc/include/asm/pci.h             |    2 -
>  arch/powerpc/kernel/pci-common.c           |   87 
> ++++++++++++++--------------
>  arch/powerpc/kernel/pci_32.c               |    2 +
>  arch/powerpc/kernel/pci_64.c               |    2 +
>  arch/powerpc/kernel/pci_of_scan.c          |    1 
>  arch/powerpc/platforms/pseries/pci_dlpar.c |    1 
>  drivers/pci/pci.c                          |    5 --
>  drivers/pcmcia/cardbus.c                   |    3 -
>  include/linux/pci.h                        |    3 -
>  9 files changed, 49 insertions(+), 57 deletions(-)
> 
> diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h
> index 6653f27..d6a36a4 100644
> --- a/arch/powerpc/include/asm/pci.h
> +++ b/arch/powerpc/include/asm/pci.h
> @@ -183,10 +183,10 @@ extern void pci_resource_to_user(const struct pci_dev 
> *dev, int bar,
>                                resource_size_t *start, resource_size_t *end);
>  
>  extern resource_size_t pcibios_io_space_offset(struct pci_controller *hose);
> -extern void pcibios_setup_bus_devices(struct pci_bus *bus);
>  extern void pcibios_setup_bus_self(struct pci_bus *bus);
>  extern void pcibios_setup_phb_io_space(struct pci_controller *hose);
>  extern void pcibios_scan_phb(struct pci_controller *hose);
> +extern void pcibios_setup_bus_notifier(void);
>  
>  #endif       /* __KERNEL__ */
>  #endif /* __ASM_POWERPC_PCI_H */
> diff --git a/arch/powerpc/kernel/pci-common.c 
> b/arch/powerpc/kernel/pci-common.c
> index 7320f36..41b39ba 100644
> --- a/arch/powerpc/kernel/pci-common.c
> +++ b/arch/powerpc/kernel/pci-common.c
> @@ -1009,40 +1009,6 @@ void __devinit pcibios_setup_bus_self(struct pci_bus 
> *bus)
>               ppc_md.pci_dma_bus_setup(bus);
>  }
>  
> -void __devinit pcibios_setup_bus_devices(struct pci_bus *bus)
> -{
> -     struct pci_dev *dev;
> -
> -     pr_debug("PCI: Fixup bus devices %d (%s)\n",
> -              bus->number, bus->self ? pci_name(bus->self) : "PHB");
> -
> -     list_for_each_entry(dev, &bus->devices, bus_list) {
> -             /* Cardbus can call us to add new devices to a bus, so ignore
> -              * those who are already fully discovered
> -              */
> -             if (dev->is_added)
> -                     continue;
> -
> -             /* Fixup NUMA node as it may not be setup yet by the generic
> -              * code and is needed by the DMA init
> -              */
> -             set_dev_node(&dev->dev, pcibus_to_node(dev->bus));
> -
> -             /* Hook up default DMA ops */
> -             set_dma_ops(&dev->dev, pci_dma_ops);
> -             set_dma_offset(&dev->dev, PCI_DRAM_OFFSET);
> -
> -             /* Additional platform DMA/iommu setup */
> -             if (ppc_md.pci_dma_dev_setup)
> -                     ppc_md.pci_dma_dev_setup(dev);
> -
> -             /* Read default IRQs and fixup if necessary */
> -             pci_read_irq_line(dev);
> -             if (ppc_md.pci_irq_fixup)
> -                     ppc_md.pci_irq_fixup(dev);
> -     }
> -}
> -
>  void pcibios_set_master(struct pci_dev *dev)
>  {
>       /* No special bus mastering setup handling */
> @@ -1059,19 +1025,9 @@ void __devinit pcibios_fixup_bus(struct pci_bus *bus)
>  
>       /* Now fixup the bus bus */
>       pcibios_setup_bus_self(bus);
> -
> -     /* Now fixup devices on that bus */
> -     pcibios_setup_bus_devices(bus);
>  }
>  EXPORT_SYMBOL(pcibios_fixup_bus);
>  
> -void __devinit pci_fixup_cardbus(struct pci_bus *bus)
> -{
> -     /* Now fixup devices on that bus */
> -     pcibios_setup_bus_devices(bus);
> -}
> -
> -
>  static int skip_isa_ioresource_align(struct pci_dev *dev)
>  {
>       if (pci_has_flag(PCI_CAN_SKIP_ISA_ALIGN) &&
> @@ -1685,6 +1641,49 @@ void __devinit pcibios_scan_phb(struct pci_controller 
> *hose)
>       }
>  }
>  
> +static int pci_bus_notify(struct notifier_block *nb, unsigned long action,
> +                       void *data)
> +{
> +     struct pci_dev *dev = to_pci_dev(data);
> +
> +     switch (action) {
> +     case BUS_NOTIFY_ADD_DEVICE:
> +             /* Setup OF node pointer in the device */
> +             dev->dev.of_node = pci_device_to_OF_node(dev);
> +
> +             /* Fixup NUMA node as it may not be setup yet by the generic
> +              * code and is needed by the DMA init
> +              */
> +             set_dev_node(&dev->dev, pcibus_to_node(dev->bus));
> +
> +             /* Hook up default DMA ops */
> +             set_dma_ops(&dev->dev, pci_dma_ops);
> +             set_dma_offset(&dev->dev, PCI_DRAM_OFFSET);
> +
> +             /* Additional platform DMA/iommu setup */
> +             if (ppc_md.pci_dma_dev_setup)
> +                     ppc_md.pci_dma_dev_setup(dev);
> +
> +             /* Read default IRQs and fixup if necessary */
> +             pci_read_irq_line(dev);
> +             if (ppc_md.pci_irq_fixup)
> +                     ppc_md.pci_irq_fixup(dev);
> +
> +             break;
> +     }
> +
> +     return 0;
> +}
> +
> +static struct notifier_block device_nb = {
> +     .notifier_call = pci_bus_notify,
> +};
> +
> +void __init pcibios_setup_bus_notifier(void)
> +{
> +     bus_register_notifier(&pci_bus_type, &device_nb);
> +}
> +
>  static void fixup_hide_host_resource_fsl(struct pci_dev *dev)
>  {
>       int i, class = dev->class >> 8;
> diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
> index 4b06ec5..640cc35 100644
> --- a/arch/powerpc/kernel/pci_32.c
> +++ b/arch/powerpc/kernel/pci_32.c
> @@ -231,6 +231,8 @@ static int __init pcibios_init(void)
>  
>       printk(KERN_INFO "PCI: Probing PCI hardware\n");
>  
> +     pcibios_setup_bus_notifier();
> +
>       if (pci_has_flag(PCI_REASSIGN_ALL_BUS))
>               pci_assign_all_buses = 1;
>  
> diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
> index 4ff190f..8b212d3 100644
> --- a/arch/powerpc/kernel/pci_64.c
> +++ b/arch/powerpc/kernel/pci_64.c
> @@ -48,6 +48,8 @@ static int __init pcibios_init(void)
>  
>       printk(KERN_INFO "PCI: Probing PCI hardware\n");
>  
> +     pcibios_setup_bus_notifier();
> +
>       /* For now, override phys_mem_access_prot. If we need it,g
>        * later, we may move that initialization to each ppc_md
>        */
> diff --git a/arch/powerpc/kernel/pci_of_scan.c 
> b/arch/powerpc/kernel/pci_of_scan.c
> index ae5ea5e..eb09eca 100644
> --- a/arch/powerpc/kernel/pci_of_scan.c
> +++ b/arch/powerpc/kernel/pci_of_scan.c
> @@ -333,7 +333,6 @@ static void __devinit __of_scan_bus(struct device_node 
> *node,
>        */
>       if (!rescan_existing)
>               pcibios_setup_bus_self(bus);
> -     pcibios_setup_bus_devices(bus);
>  
>       /* Now scan child busses */
>       list_for_each_entry(dev, &bus->devices, bus_list) {
> diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c 
> b/arch/powerpc/platforms/pseries/pci_dlpar.c
> index 3ccebc8..0b1b6b3 100644
> --- a/arch/powerpc/platforms/pseries/pci_dlpar.c
> +++ b/arch/powerpc/platforms/pseries/pci_dlpar.c
> @@ -120,7 +120,6 @@ void pcibios_add_pci_devices(struct pci_bus * bus)
>               num = pci_scan_slot(bus, PCI_DEVFN(slotno, 0));
>               if (!num)
>                       return;
> -             pcibios_setup_bus_devices(bus);
>               max = bus->busn_res.start;
>               for (pass=0; pass < 2; pass++)
>                       list_for_each_entry(dev, &bus->devices, bus_list) {
> diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
> index 15d442a..43e0a4f 100644
> --- a/drivers/pci/pci.c
> +++ b/drivers/pci/pci.c
> @@ -3789,11 +3789,6 @@ int __attribute__ ((weak)) pci_ext_cfg_avail(struct 
> pci_dev *dev)
>       return 1;
>  }
>  
> -void __weak pci_fixup_cardbus(struct pci_bus *bus)
> -{
> -}
> -EXPORT_SYMBOL(pci_fixup_cardbus);
> -
>  static int __init pci_setup(char *str)
>  {
>       while (str) {
> diff --git a/drivers/pcmcia/cardbus.c b/drivers/pcmcia/cardbus.c
> index 24caeaf..a980691 100644
> --- a/drivers/pcmcia/cardbus.c
> +++ b/drivers/pcmcia/cardbus.c
> @@ -71,7 +71,6 @@ int __ref cb_alloc(struct pcmcia_socket *s)
>       unsigned int max, pass;
>  
>       s->functions = pci_scan_slot(bus, PCI_DEVFN(0, 0));
> -     pci_fixup_cardbus(bus);
>  
>       max = bus->busn_res.start;
>       for (pass = 0; pass < 2; pass++)
> @@ -85,7 +84,6 @@ int __ref cb_alloc(struct pcmcia_socket *s)
>        */
>       pci_bus_size_bridges(bus);
>       pci_bus_assign_resources(bus);
> -     cardbus_config_irq_and_cls(bus, s->pci_irq);
>  
>       /* socket specific tune function */
>       if (s->tune_bridge)
> @@ -93,6 +91,7 @@ int __ref cb_alloc(struct pcmcia_socket *s)
>  
>       pci_enable_bridges(bus);
>       pci_bus_add_devices(bus);
> +     cardbus_config_irq_and_cls(bus, s->pci_irq);
>  
>       return 0;
>  }
> diff --git a/include/linux/pci.h b/include/linux/pci.h
> index a0e2d7f..3924c02 100644
> --- a/include/linux/pci.h
> +++ b/include/linux/pci.h
> @@ -651,9 +651,6 @@ resource_size_t pcibios_align_resource(void *, const 
> struct resource *,
>                               resource_size_t);
>  void pcibios_update_irq(struct pci_dev *, int irq);
>  
> -/* Weak but can be overriden by arch */
> -void pci_fixup_cardbus(struct pci_bus *);
> -
>  /* Generic PCI functions used internally */
>  
>  void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region 
> *region,


_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev

Reply via email to