Jesse Larrew <jlar...@linux.vnet.ibm.com> wrote: > On 06/08/2012 06:36 AM, Michael Neuling wrote: > > > > -/* General Purpose Registers (GPRs) */ > > +/* > > + * General Purpose Registers (GPRs) > > + * > > + * The lower case r0-r31 should be used in preference to the upper > > + * case R0-R31 as they provide more error checking in the assembler. > > + * Use R0-31 only when really nessesary. > > + */ > > > > -#define r0 0 > > -#define r1 1 > > -#define r2 2 > > -#define r3 3 > > -#define r4 4 > > -#define r5 5 > > -#define r6 6 > > -#define r7 7 > > -#define r8 8 > > -#define r9 9 > > -#define r10 10 > > -#define r11 11 > > -#define r12 12 > > -#define r13 13 > > -#define r14 14 > > -#define r15 15 > > -#define r16 16 > > -#define r17 17 > > -#define r18 18 > > -#define r19 19 > > -#define r20 20 > > -#define r21 21 > > -#define r22 22 > > -#define r23 23 > > -#define r24 24 > > -#define r25 25 > > -#define r26 26 > > -#define r27 27 > > -#define r28 28 > > -#define r29 29 > > -#define r30 30 > > -#define r31 31 > > +#define r0 %r0 > > +#define r1 %r1 > > +#define r2 %r2 > > +#define r3 %r3 > > +#define r4 %r4 > > +#define r5 %r5 > > +#define r6 %r6 > > +#define r7 %r7 > > +#define r8 %r8 > > +#define r9 %r9 > > +#define r10 %r10 > > +#define r11 %r11 > > +#define r12 %r12 > > +#define r13 %r13 > > +#define r14 %r14 > > +#define r15 %r15 > > +#define r16 %r16 > > +#define r17 %r17 > > +#define r18 %r18 > > +#define r19 %r19 > > +#define r20 %r20 > > +#define r21 %r21 > > +#define r22 %r22 > > +#define r23 %r23 > > +#define r24 %r24 > > +#define r25 %r25 > > +#define r26 %r26 > > +#define r27 %r27 > > +#define r28 %r28 > > +#define r29 %r29 > > +#define r30 %r30 > > +#define r31 %r31 > > > > #define R0 0 > > #define R1 1 > > > I think your patch was truncated somehow.
How so? Mikey _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
