> -----Original Message----- > From: Joakim Tjernlund [mailto:[email protected]] > Sent: Friday, July 20, 2012 16:36 PM > To: Zang Roy-R61911 > Cc: [email protected] > Subject: RE: PCIE Hotplug on P2010(mpc85xx) ? > > Zang Roy-R61911 <[email protected]> wrote on 2012/07/20 10:15:46: > > > > I do not think P2010 has a functional pciehp module in the pcie > controller. > > Roy > > Maybe there is, see my latest mail to the list (today) titled: > mpc8xxx PCIe hotplug needs fixing, some clues No. if you check the hotplug register in configuration space in P2010, which missrd some important bit define for hotplug, for example, "Data Link Layer State Changed" in slot status register. And more, hotplug needs extra hardware pin in the silicon, which is missing for P2010. Roy > > > > > > -----Original Message----- > > > From: Linuxppc-dev [mailto:linuxppc-dev-bounces+tie- > > > [email protected]] On Behalf Of Joakim Tjernlund > > > Sent: Tuesday, July 10, 2012 3:44 AM > > > To: [email protected] > > > Subject: PCIE Hotplug on P2010(mpc85xx) ? > > > > > > > > > Trying to get the pciehp module to work on the above system. > > > I can see it register but then nothing happens. I suspect there is > > > something missing that I don't see ATM. Any clues what to look for? > > > > > > Jocke > > > > > > _______________________________________________ > > > Linuxppc-dev mailing list > > > [email protected] > > > https://lists.ozlabs.org/listinfo/linuxppc-dev > > > > >
_______________________________________________ Linuxppc-dev mailing list [email protected] https://lists.ozlabs.org/listinfo/linuxppc-dev
