Power supply for PCI controller ATMU registers is off when system go to
deep-sleep state. So ATMU registers should be re-setup during PCI
controllers resume from sleep.
Signed-off-by: Jia Hongtao <b38...@freescale.com>
Signed-off-by: Li Yang <le...@freescale.com>
---
arch/powerpc/sysdev/fsl_pci.c | 21 +++++++++++++++++++--
1 files changed, 19 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index ffb93ae..793a017 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -89,7 +89,7 @@ static int fsl_pci_dma_set_mask(struct device *dev, u64
dma_mask)
return 0;
}
-static int __init setup_one_atmu(struct ccsr_pci __iomem *pci,
+static int setup_one_atmu(struct ccsr_pci __iomem *pci,
unsigned int index, const struct resource *res,
resource_size_t offset)
{
@@ -126,7 +126,7 @@ static int __init setup_one_atmu(struct ccsr_pci __iomem
*pci,
}
/* atmu setup for fsl pci/pcie controller */
-static void __init setup_pci_atmu(struct pci_controller *hose,
+static void setup_pci_atmu(struct pci_controller *hose,
struct resource *rsrc)
{
struct ccsr_pci __iomem *pci;
@@ -902,12 +902,29 @@ static int __devinit fsl_pci_probe(struct platform_device
*pdev)
return 0;
}
+#ifdef CONFIG_SUSPEND
+static int fsl_pci_resume(struct platform_device *pdev)
+{
+ struct pci_controller *hose;
+ struct resource pci_rsrc;
+
+ hose = pci_find_hose_for_OF_device(pdev->dev.of_node);
+ of_address_to_resource(pdev->dev.of_node, 0, &pci_rsrc);
+ setup_pci_atmu(hose, &pci_rsrc);
+
+ return 0;
+}
+#endif
+
static struct platform_driver fsl_pci_driver = {
.driver = {
.name = "fsl-pci",
.of_match_table = pci_ids,
},
.probe = fsl_pci_probe,
+#ifdef CONFIG_SUSPEND
+ .resume = fsl_pci_resume,
+#endif
};
static int __init fsl_pci_init(void)
--
1.7.5.1
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
