Hi Joerg,
Any comments? Can we apply this patch?
Regards
Varun
> -----Original Message-----
> From: Sethi Varun-B16395
> Sent: Tuesday, November 20, 2012 7:25 PM
> To: joerg.roe...@amd.com; io...@lists.linux-foundation.org; linuxppc-
> d...@lists.ozlabs.org; linux-ker...@vger.kernel.org; Wood Scott-B07421;
> Tabi Timur-B04825
> Cc: Sethi Varun-B16395
> Subject: [PATCH 3/4 v5] iommu/fsl: Add iommu domain attributes required
> by fsl PAMU driver.
>
> Added the following domain attributes required by FSL PAMU driver:
> 1. Subwindows field added to the iommu domain geometry attribute.
> 2. Added new iommu stash attribute, which allows setting of the
> LIODN specific stash id parameter through IOMMU API.
> 3. Added an attribute for enabling/disabling DMA to a particular
> memory window.
>
> Signed-off-by: Varun Sethi <varun.se...@freescale.com>
> ---
> changes in v5:
> - Updated description of the subwindows field.
> changes in v4:
> - Updated comment explaining subwindows(as mentioned by Scott).
> change in v3:
> -renamed the stash attribute targets
> include/linux/iommu.h | 43 +++++++++++++++++++++++++++++++++++++++++++
> 1 files changed, 43 insertions(+), 0 deletions(-)
>
> diff --git a/include/linux/iommu.h b/include/linux/iommu.h index
> f3b99e1..7ca1cda 100644
> --- a/include/linux/iommu.h
> +++ b/include/linux/iommu.h
> @@ -44,6 +44,41 @@ struct iommu_domain_geometry {
> dma_addr_t aperture_start; /* First address that can be mapped
> */
> dma_addr_t aperture_end; /* Last address that can be mapped
> */
> bool force_aperture; /* DMA only allowed in mappable range?
> */
> +
> + /*
> + * A geometry mapping can be created in one of the following ways
> + * for an IOMMU:
> + * 1. A single contiguous window
> + * 2. Through arbritary paging throughout the aperture.
> + * 3. Using multiple subwindows
> + *
> + * In absence of arbritary paging, subwindows allow for supporting
> + * physically discontiguous mappings.
> + *
> + * This attribute indicates number of DMA subwindows supported by
> + * the geometry. If there is a single window that maps the entire
> + * geometry, attribute must be set to "1". A value of "0" implies
> + * that this mechanism is not used at all(normal paging is used).
> + * Value other than* "0" or "1" indicates the actual number of
> + * subwindows.
> + */
> + u32 subwindows;
> +};
> +
> +/* cache stash targets */
> +#define IOMMU_ATTR_CACHE_L1 1
> +#define IOMMU_ATTR_CACHE_L2 2
> +#define IOMMU_ATTR_CACHE_L3 3
> +
> +/* This attribute corresponds to IOMMUs capable of generating
> + * a stash transaction. A stash transaction is typically a
> + * hardware initiated prefetch of data from memory to cache.
> + * This attribute allows configuring stashig specific parameters
> + * in the IOMMU hardware.
> + */
> +struct iommu_stash_attribute {
> + u32 cpu; /* cpu number */
> + u32 cache; /* cache to stash to: L1,L2,L3 */
> };
>
> struct iommu_domain {
> @@ -60,6 +95,14 @@ struct iommu_domain { enum iommu_attr {
> DOMAIN_ATTR_MAX,
> DOMAIN_ATTR_GEOMETRY,
> + /* Set the IOMMU hardware stashing
> + * parameters.
> + */
> + DOMAIN_ATTR_STASH,
> + /* Explicity enable/disable DMA for a
> + * particular memory window.
> + */
> + DOMAIN_ATTR_ENABLE,
> };
>
> #ifdef CONFIG_IOMMU_API
> --
> 1.7.4.1
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
