> -----Original Message-----
> From: Wang Dongsheng-B40534
> Sent: Wednesday, April 03, 2013 10:49 AM
> To: Wood Scott-B07421
> Cc: linuxppc-dev@lists.ozlabs.org
> Subject: RE: [PATCH v2 1/4] powerpc/mpic: add irq_set_wake support
>
>
>
> > -----Original Message-----
> > From: Wood Scott-B07421
> > Sent: Wednesday, April 03, 2013 8:37 AM
> > To: Wang Dongsheng-B40534
> > Cc: linuxppc-dev@lists.ozlabs.org; Wang Dongsheng-B40534
> > Subject: Re: [PATCH v2 1/4] powerpc/mpic: add irq_set_wake support
> >
> > On 04/02/2013 01:40:37 AM, Wang Dongsheng wrote:
> > > Add irq_set_wake support. Just add IRQF_NO_SUSPEND to
> > > desc->action->flag.
> > > So the wake up interrupt will not be disable in suspend_device_irqs.
> > >
> > > Signed-off-by: Wang Dongsheng <dongsheng.w...@freescale.com>
> > > ---
> > > v2:
> > > * Add: Check freescale chip in mpic_irq_set_wake().
> > > * Remove: Support mpic_irq_set_wake() in ht_chip.
> > >
> > > arch/powerpc/sysdev/mpic.c | 18 ++++++++++++++++++
> > > 1 file changed, 18 insertions(+)
> > >
> > > diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
> > > index 3b2efd4..50d1ee1 100644
> > > --- a/arch/powerpc/sysdev/mpic.c
> > > +++ b/arch/powerpc/sysdev/mpic.c
> > > @@ -920,6 +920,22 @@ int mpic_set_irq_type(struct irq_data *d,
> > > unsigned int flow_type)
> > > return IRQ_SET_MASK_OK_NOCOPY;
> > > }
> > >
> > > +static int mpic_irq_set_wake(struct irq_data *d, unsigned int on) {
> > > + struct irq_desc *desc = container_of(d, struct irq_desc,
> > > irq_data);
> > > + struct mpic *mpic = mpic_from_irq_data(d);
> > > +
> > > + if (!(mpic->flags & MPIC_FSL))
> > > + return -EINVAL;
> >
> > I was thinking more along the lines of using MPIC_FSL during init to
> > decide whether to write this function to .irq_set_wake,
>
> I think the static registration method is more reasonable. We must
> consider readability. And mpic_irq_set_wake() will not be frequent calls.
> So within
> mpic_irq_set_wake() to decide is reasonable.
>
> > though that could probably wait until there's a second type of MPIC
> > that needs this (if ever).
> Even if the mpic_irq_set_wake() register in the first type of MPIC that
> is not belong MPIC_FSL, the function can return errno. I think the errno
> should be "-ENXIO".
> See kernel/irq/manage.c, set_irq_wake_real() the return value.
> The desc->irq_data.chip->irq_set_wake is null, the errno is -ENXIO.
>
> s/-EINVAL/-ENXIO/
About patches, if there are no other suggestion I'll send the V3.
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
