On Aug 7, 2013, at 7:03 PM, Stephen N Chivers wrote: > Add support for the Motorola/Emerson MVME5100 Single Board Computer. > > The MVME5100 is a 6U form factor VME64 computer with: > > - A single MPC7410 or MPC750 CPU > - A HAWK Processor Host Bridge (CPU to PCI) and > MultiProcessor Interrupt Controller (MPIC) > - Up to 500Mb of onboard memory > - A M48T37 Real Time Clock (RTC) and Non-Volatile Memory chip > - Two 16550 compatible UARTS > - Two Intel E100 Fast Ethernets > - Two PCI Mezzanine Card (PMC) Slots > - PPCBug Firmware > > The HAWK PHB/MPIC is compatible with the MPC10x devices. > > There is no onboard disk support. This is usually provided by installing a > PMC > in first PMC slot. > > This patch revives the board support, it was present in early 2.6 > series kernels. The board support in those days was by Matt Porter of > MontaVista Software. > > CSC Australia has around 31 of these boards in service. The kernel in use > for the boards is based on 2.6.31. The boards are operated without disks > from a file server. > > This patch is based on linux-3.11-rc4 and has been boot tested. > > Signed-off-by: Stephen Chivers <schiv...@csc.com> > --- > arch/powerpc/boot/dts/mvme5100.dts | 195 ++ > arch/powerpc/boot/mvme5100.c | 28 + > arch/powerpc/configs/mvme5100_defconfig | 2597 > +++++++++++++++++++++++++ > arch/powerpc/platforms/embedded6xx/mvme5100.c | 288 +++ > 4 files changed, 3108 insertions(+), 0 deletions(-)
Please look at fixing the white space issues you seem to have throughout this patch. Also, we don't take full defconfigs in the tree, look at 'make savedefconfig' - k _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev