On Sep 10, 2013, at 10:49 PM, Zhao Qiang wrote: > Since P1010RDB-PA and P1010RDB-PB boards use different external PHY > interrupt signals. > And actually the PHY interrupt is not used effectively with > corresponding interrupt handler. > So we can remove the interrupts node without side-effect to comply > with both P1010RDB-PA and P1010RDB-PB. > > Signed-off-by: Shengzhou Liu <shengzhou....@freescale.com> > Signed-off-by: Zhao Qiang <b45...@freescale.com> > --- > arch/powerpc/boot/dts/p1010rdb.dtsi | 3 --- > 1 file changed, 3 deletions(-) >
NAK. The device tree should represent the HW not what drivers decide to do with it. If different board revs have different interrupt signals than create dts's to handle the 2 board revs. - k _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
