The previous scheme always put 0 as a parent slot#. However it is
not always the case and QEMU's PCI bridge does not support putting
device at slot#0 as it claims SHPC support for hotplug.
This modifies the interrups map to let the linux guest resolve XICS
global interrupt number correctly.
Signed-off-by: Alexey Kardashevskiy <a...@ozlabs.ru>
---
Changes:
v2:
* removed redundand r-stack push-pop
---
This is the example of working system:
[root@erif_root pci@1]# lspci
0001:00:01.0 PCI bridge: Red Hat, Inc. Device 0001
0001:01:02.0 PCI bridge: Red Hat, Inc. Device 0001
0001:01:03.0 PCI bridge: Red Hat, Inc. Device 0001
0001:02:01.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet
Controller (Copper) (rev 06)
0001:02:02.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet
Controller (Copper) (rev 06)
0001:03:01.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet
Controller (Copper) (rev 06)
0001:03:02.0 Ethernet controller: Intel Corporation 82571EB Gigabit Ethernet
Controller (Copper) (rev 06)
[root@erif_root pci@1]# pwd
/proc/device-tree/pci@80000002000000f/pci@1
[root@erif_root pci@1]# hexdump -e '9/4 "%08x "' -e '"\n"' i*map
00001000 00000000 00000000 00000001 3e57f7e0 00000800 00000000 00000000 00000003
00001000 00000000 00000000 00000002 3e57f7e0 00000800 00000000 00000000 00000000
00001000 00000000 00000000 00000003 3e57f7e0 00000800 00000000 00000000 00000001
00001000 00000000 00000000 00000004 3e57f7e0 00000800 00000000 00000000 00000002
00001800 00000000 00000000 00000001 3e57f7e0 00000800 00000000 00000000 00000000
00001800 00000000 00000000 00000002 3e57f7e0 00000800 00000000 00000000 00000001
00001800 00000000 00000000 00000003 3e57f7e0 00000800 00000000 00000000 00000002
00001800 00000000 00000000 00000004 3e57f7e0 00000800 00000000 00000000 00000003
[root@erif_root pci@1]# cd pci@2/
[root@erif_root pci@2]# hexdump -e '9/4 "%08x "' -e '"\n"' i*map
00000800 00000000 00000000 00000001 3e5a86f0 00001000 00000000 00000000 00000002
00000800 00000000 00000000 00000002 3e5a86f0 00001000 00000000 00000000 00000003
00000800 00000000 00000000 00000003 3e5a86f0 00001000 00000000 00000000 00000000
00000800 00000000 00000000 00000004 3e5a86f0 00001000 00000000 00000000 00000001
00001000 00000000 00000000 00000001 3e5a86f0 00001000 00000000 00000000 00000003
00001000 00000000 00000000 00000002 3e5a86f0 00001000 00000000 00000000 00000000
00001000 00000000 00000000 00000003 3e5a86f0 00001000 00000000 00000000 00000001
00001000 00000000 00000000 00000004 3e5a86f0 00001000 00000000 00000000 00000002
[root@erif_root pci@2]# cd ethernet@
ethernet@1/ ethernet@2/
[root@erif_root pci@2]# cd ethernet@1/
[root@erif_root ethernet@1]# lsprop reg
reg 00020800 00000000 00000000 00000000 00000000
02020810 00000000 00000000 00000000 00020000
02020814 00000000 00000000 00000000 00020000
01020818 00000000 00000000 00000000 00000020
02020830 00000000 00000000 00000000 00020000
[root@erif_root ethernet@1]# lsprop interrupts
interrupts 00000002
---
board-qemu/slof/pci-interrupts.fs | 31 ++++++++++++++++++++-----------
1 file changed, 20 insertions(+), 11 deletions(-)
diff --git a/board-qemu/slof/pci-interrupts.fs
b/board-qemu/slof/pci-interrupts.fs
index a12d7bb..e11b779 100644
--- a/board-qemu/slof/pci-interrupts.fs
+++ b/board-qemu/slof/pci-interrupts.fs
@@ -1,17 +1,26 @@
: pci-gen-irq-map-one ( prop-addr prop-len slot pin -- prop-addr prop-len )
- 2dup + 4 mod ( prop-addr
prop-len slot pin parentpin )
+ 2dup + 4 mod ( prop-addr prop-len slot pin parentpin )
+ >r >r ( prop-addr prop-len slot R: swizzledpin
pin )
+
+ \ Child slot#
+ B lshift encode-int+ ( prop-addr prop-len R: swizzledpin pin )
+ \ Child 64bit BAR (not really used)
+ 0 encode-64+
+ \ Chile pin#
+ r> encode-int+ ( prop-addr prop-len R: swizzledpin )
+
+ \ Parent phandle
+ get-parent encode-int+
+
+ \ Parent slot#
get-node >space
- pci-addr2dev + 1- 4 mod 1+ \ do swizzling ( prop-addr
prop-len slot pin swizzledpin )
- >r >r >r ( prop-addr
prop-len R: swizzledpin pin slot )
-
- r> B lshift encode-int+
- 0 encode-64+ \ device slot ( prop-addr
prop-len R: swizzledpin pin )
- r> encode-int+ \ device pin ( prop-addr
prop-len R: swizzledpin )
-
- get-parent encode-int+ \ parent phandle
- 0 encode-int+ 0 encode-64+ \ parent slot
- r> encode-int+ \ parent swizzled pin ( prop-addr
prop-len R: )
+ pci-addr2dev B lshift ( prop-addr prop-len parent-slot R:
swizzledpin )
+ encode-int+
+ \ Parent 64bit BAR (not really used)
+ 0 encode-64+
+ \ Parent pin
+ r> encode-int+ ( prop-addr prop-len R: )
;
: pci-gen-irq-entry ( prop-addr prop-len config-addr -- prop-addr prop-len )
--
1.8.4.rc4
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
