On Mon, 2014-01-06 at 12:23 +1100, Stephen Chivers wrote: > Add support for the Motorola/Emerson MVME5100 Single Board Computer. > > The MVME5100 is a 6U form factor VME64 computer with: > > - A single MPC7410 or MPC750 CPU > - A HAWK Processor Host Bridge (CPU to PCI) and > MultiProcessor Interrupt Controller (MPIC) > - Up to 500Mb of onboard memory > - A M48T37 Real Time Clock (RTC) and Non-Volatile Memory chip > - Two 16550 compatible UARTS > - Two Intel E100 Fast Ethernets > - Two PCI Mezzanine Card (PMC) Slots > - PPCBug Firmware > > The HAWK PHB/MPIC is compatible with the MPC10x devices. > > There is no onboard disk support. This is usually provided by installing a PMC > in first PMC slot. > > This patch revives the board support, it was present in early 2.6 > series kernels. The board support in those days was by Matt Porter of > MontaVista Software. > > CSC Australia has around 31 of these boards in service. The kernel in use > for the boards is based on 2.6.31. The boards are operated without disks > from a file server. > > This patch is based on linux-3.13-rc2 and has been boot tested. > > Only boards with 512 Mb of memory are known to work. > > V1->V2: > Address comments by Kumar Gala and Scott Wood. > Minor adjustment to platforms/embedded6xx/Kconfig to ensure > correct indentation where possible. > > V2->V3: > Address comments by Scott Wood and Ben Herrenschmidt. > Address errors reported by checkpatch. > > V3->V4: > Address comment by Geert Uytterhoeven > Add tested by Alessio Bogani. > > V4->V5: > Correct horrible typo in patch history. > Kular Gama is Kumar Gala.
The patch history should go below the --- line, as it's for reviewers who have seen previous versions rather than for the git history. -Scott _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev