From: Tang Yuantian <yuantian.t...@freescale.com>

Add power sensor chip ina220 node in dts to support
power monitor

Signed-off-by: Tang Yuantian <yuantian.t...@freescale.com>
---
 arch/powerpc/boot/dts/t4240qds.dts | 42 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 42 insertions(+)

diff --git a/arch/powerpc/boot/dts/t4240qds.dts 
b/arch/powerpc/boot/dts/t4240qds.dts
index 63e81b0..97683f6 100644
--- a/arch/powerpc/boot/dts/t4240qds.dts
+++ b/arch/powerpc/boot/dts/t4240qds.dts
@@ -159,6 +159,48 @@
                                                interrupts = <0x1 0x1 0 0>;
                                        };
                                };
+
+                               i2c@2 {
+                                       #address-cells = <1>;
+                                       #size-cells = <0>;
+                                       reg = <0x2>;
+
+                                       ina220@40 {
+                                               compatible = "ti,ina220";
+                                               reg = <0x40>;
+                                               shunt-resistor = <1000>;
+                                       };
+
+                                       ina220@41 {
+                                               compatible = "ti,ina220";
+                                               reg = <0x41>;
+                                               shunt-resistor = <1000>;
+                                       };
+
+                                       ina220@44 {
+                                               compatible = "ti,ina220";
+                                               reg = <0x44>;
+                                               shunt-resistor = <1000>;
+                                       };
+
+                                       ina220@45 {
+                                               compatible = "ti,ina220";
+                                               reg = <0x45>;
+                                               shunt-resistor = <1000>;
+                                       };
+
+                                       ina220@46 {
+                                               compatible = "ti,ina220";
+                                               reg = <0x46>;
+                                               shunt-resistor = <1000>;
+                                       };
+
+                                       ina220@47 {
+                                               compatible = "ti,ina220";
+                                               reg = <0x47>;
+                                               shunt-resistor = <1000>;
+                                       };
+                               };
                        };
                };
 
-- 
1.8.0


_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev

Reply via email to