On 04/15/2014 12:28 AM, Scott Wood wrote:
On Mon, 2014-04-14 at 14:35 +0200, Martijn de Gouw wrote:+ lbc: localbus@ffe124000 { + reg = <0xf 0xfe124000 0 0x1000>; + ranges = <0 0 0xf 0xef800000 0x800000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0 0 0x00800000>; + bank-width = <2>; + device-width = <2>; + partition@rcw { + label = "rcw"; + reg = <0x00000000 0x00020000>; + }; + partition@fman-ucode { + label = "fman-ucode"; + reg = <0x00020000 0x00020000>; + }; + partition@user { + label = "user"; + reg = <0x00040000 0x00680000>; + }; + partition@env0 { + label = "env0"; + reg = <0x006c0000 0x00020000>; + }; + partition@env1 { + label = "env1"; + reg = <0x006e0000 0x00020000>; + }; + partition@u-boot { + label = "u-boot"; + reg = <0x00700000 0x00080000>; + }; + partition@u-boot-backup { + label = "u-boot-backup"; + reg = <0x00780000 0x00080000>; + };These are not valid unit addresses. Regardless, please don't put partition info in the dts.
How is this different than the partitions defined in i.e. p4080ds.dts? Of course I can remove them from the dts, but where should they be defined? -- Martijn de Gouw Engineer Prodrive Technologies B.V. Mobile: +31 63 17 76 161 Phone: +31 40 26 76 200 _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
