This patch defines a quirk to disable the block count
for single block transactions.
It is a preparation and will be used by Fujitsu
SDHCI controller f_sdh30 driver.
Signed-off-by: Vincent Yang <vincent.y...@tw.fujitsu.com>
---
drivers/mmc/host/sdhci.c | 8 +++++---
include/linux/mmc/sdhci.h | 2 ++
2 files changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 900b4e4..169e17d 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -876,7 +876,7 @@ static void sdhci_prepare_data(struct sdhci_host *host,
struct mmc_command *cmd)
static void sdhci_set_transfer_mode(struct sdhci_host *host,
struct mmc_command *cmd)
{
- u16 mode;
+ u16 mode = 0;
struct mmc_data *data = cmd->data;
if (data == NULL) {
@@ -889,9 +889,11 @@ static void sdhci_set_transfer_mode(struct sdhci_host
*host,
WARN_ON(!host->data);
- mode = SDHCI_TRNS_BLK_CNT_EN;
+ if (!(host->quirks2 & SDHCI_QUIRK2_SUPPORT_SINGLE))
+ mode = SDHCI_TRNS_BLK_CNT_EN;
+
if (mmc_op_multi(cmd->opcode) || data->blocks > 1) {
- mode |= SDHCI_TRNS_MULTI;
+ mode = SDHCI_TRNS_BLK_CNT_EN | SDHCI_TRNS_MULTI;
/*
* If we are sending CMD23, CMD12 never gets sent
* on successful completion (so no Auto-CMD12).
diff --git a/include/linux/mmc/sdhci.h b/include/linux/mmc/sdhci.h
index bcbad45..72072d1 100644
--- a/include/linux/mmc/sdhci.h
+++ b/include/linux/mmc/sdhci.h
@@ -102,6 +102,8 @@ struct sdhci_host {
#define SDHCI_QUIRK2_VOLTAGE_SWITCH (1<<8)
/* forced tuned clock */
#define SDHCI_QUIRK2_TUNING_WORK_AROUND (1<<9)
+/* disable the block count for single block transactions */
+#define SDHCI_QUIRK2_SUPPORT_SINGLE (1<<10)
int irq; /* Device IRQ */
void __iomem *ioaddr; /* Mapped address */
--
1.9.0
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
