Original driver didn't store the number of slots, just fix the slot number
to 2, use this default number to calculate bclk and pins for TX/RX.
In this patch, add one parameter for slots, and update the calculation of
bclk and pins of TX/RX. Then driver will be compatible with slots > 2 in
TDM mode.
Signed-off-by: Shengjiu Wang <shengjiu.w...@freescale.com>
---
sound/soc/fsl/fsl_esai.c | 14 +++++++++++---
sound/soc/fsl/fsl_esai.h | 8 ++++----
2 files changed, 15 insertions(+), 7 deletions(-)
diff --git a/sound/soc/fsl/fsl_esai.c b/sound/soc/fsl/fsl_esai.c
index 72d154e..f252370 100644
--- a/sound/soc/fsl/fsl_esai.c
+++ b/sound/soc/fsl/fsl_esai.c
@@ -38,6 +38,7 @@
* @fsysclk: system clock source to derive HCK, SCK and FS
* @fifo_depth: depth of tx/rx FIFO
* @slot_width: width of each DAI slot
+ * @slots: number of slots
* @hck_rate: clock rate of desired HCKx clock
* @sck_rate: clock rate of desired SCKx clock
* @hck_dir: the direction of HCKx pads
@@ -56,6 +57,7 @@ struct fsl_esai {
struct clk *fsysclk;
u32 fifo_depth;
u32 slot_width;
+ u32 slots;
u32 hck_rate[2];
u32 sck_rate[2];
bool hck_dir[2];
@@ -363,6 +365,7 @@ static int fsl_esai_set_dai_tdm_slot(struct snd_soc_dai
*dai, u32 tx_mask,
ESAI_xSMB_xS_MASK, ESAI_xSMB_xS(rx_mask));
esai_priv->slot_width = slot_width;
+ esai_priv->slots = slots;
return 0;
}
@@ -510,10 +513,11 @@ static int fsl_esai_hw_params(struct snd_pcm_substream
*substream,
bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
u32 width = snd_pcm_format_width(params_format(params));
u32 channels = params_channels(params);
+ u32 pins = DIV_ROUND_UP(channels, esai_priv->slots);
u32 bclk, mask, val;
int ret;
- bclk = params_rate(params) * esai_priv->slot_width * 2;
+ bclk = params_rate(params) * esai_priv->slot_width * esai_priv->slots;
ret = fsl_esai_set_bclk(dai, tx, bclk);
if (ret)
@@ -530,7 +534,7 @@ static int fsl_esai_hw_params(struct snd_pcm_substream
*substream,
mask = ESAI_xFCR_xFR_MASK | ESAI_xFCR_xWA_MASK | ESAI_xFCR_xFWM_MASK |
(tx ? ESAI_xFCR_TE_MASK | ESAI_xFCR_TIEN : ESAI_xFCR_RE_MASK);
val = ESAI_xFCR_xWA(width) | ESAI_xFCR_xFWM(esai_priv->fifo_depth) |
- (tx ? ESAI_xFCR_TE(channels) | ESAI_xFCR_TIEN :
ESAI_xFCR_RE(channels));
+ (tx ? ESAI_xFCR_TE(pins) | ESAI_xFCR_TIEN : ESAI_xFCR_RE(pins));
regmap_update_bits(esai_priv->regmap, REG_ESAI_xFCR(tx), mask, val);
@@ -565,6 +569,7 @@ static int fsl_esai_trigger(struct snd_pcm_substream
*substream, int cmd,
struct fsl_esai *esai_priv = snd_soc_dai_get_drvdata(dai);
bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
u8 i, channels = substream->runtime->channels;
+ u32 pins = DIV_ROUND_UP(channels, esai_priv->slots);
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
@@ -579,7 +584,7 @@ static int fsl_esai_trigger(struct snd_pcm_substream
*substream, int cmd,
regmap_update_bits(esai_priv->regmap, REG_ESAI_xCR(tx),
tx ? ESAI_xCR_TE_MASK : ESAI_xCR_RE_MASK,
- tx ? ESAI_xCR_TE(channels) :
ESAI_xCR_RE(channels));
+ tx ? ESAI_xCR_TE(pins) : ESAI_xCR_RE(pins));
break;
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_STOP:
@@ -783,6 +788,9 @@ static int fsl_esai_probe(struct platform_device *pdev)
/* Set a default slot size */
esai_priv->slot_width = 32;
+ /* Set a default slot number */
+ esai_priv->slots = 2;
+
/* Set a default master/slave state */
esai_priv->slave_mode = true;
diff --git a/sound/soc/fsl/fsl_esai.h b/sound/soc/fsl/fsl_esai.h
index 75e1403..91a550f 100644
--- a/sound/soc/fsl/fsl_esai.h
+++ b/sound/soc/fsl/fsl_esai.h
@@ -130,8 +130,8 @@
#define ESAI_xFCR_RE_WIDTH 4
#define ESAI_xFCR_TE_MASK (((1 << ESAI_xFCR_TE_WIDTH) - 1) <<
ESAI_xFCR_xE_SHIFT)
#define ESAI_xFCR_RE_MASK (((1 << ESAI_xFCR_RE_WIDTH) - 1) <<
ESAI_xFCR_xE_SHIFT)
-#define ESAI_xFCR_TE(x) ((ESAI_xFCR_TE_MASK >> (ESAI_xFCR_TE_WIDTH -
((x + 1) >> 1))) & ESAI_xFCR_TE_MASK)
-#define ESAI_xFCR_RE(x) ((ESAI_xFCR_RE_MASK >> (ESAI_xFCR_RE_WIDTH -
((x + 1) >> 1))) & ESAI_xFCR_RE_MASK)
+#define ESAI_xFCR_TE(x) ((ESAI_xFCR_TE_MASK >> (ESAI_xFCR_TE_WIDTH -
x)) & ESAI_xFCR_TE_MASK)
+#define ESAI_xFCR_RE(x) ((ESAI_xFCR_RE_MASK >> (ESAI_xFCR_RE_WIDTH -
x)) & ESAI_xFCR_RE_MASK)
#define ESAI_xFCR_xFR_SHIFT 1
#define ESAI_xFCR_xFR_MASK (1 << ESAI_xFCR_xFR_SHIFT)
#define ESAI_xFCR_xFR (1 << ESAI_xFCR_xFR_SHIFT)
@@ -272,8 +272,8 @@
#define ESAI_xCR_RE_WIDTH 4
#define ESAI_xCR_TE_MASK (((1 << ESAI_xCR_TE_WIDTH) - 1) <<
ESAI_xCR_xE_SHIFT)
#define ESAI_xCR_RE_MASK (((1 << ESAI_xCR_RE_WIDTH) - 1) <<
ESAI_xCR_xE_SHIFT)
-#define ESAI_xCR_TE(x) ((ESAI_xCR_TE_MASK >>
(ESAI_xCR_TE_WIDTH - ((x + 1) >> 1))) & ESAI_xCR_TE_MASK)
-#define ESAI_xCR_RE(x) ((ESAI_xCR_RE_MASK >>
(ESAI_xCR_RE_WIDTH - ((x + 1) >> 1))) & ESAI_xCR_RE_MASK)
+#define ESAI_xCR_TE(x) ((ESAI_xCR_TE_MASK >>
(ESAI_xCR_TE_WIDTH - x)) & ESAI_xCR_TE_MASK)
+#define ESAI_xCR_RE(x) ((ESAI_xCR_RE_MASK >>
(ESAI_xCR_RE_WIDTH - x)) & ESAI_xCR_RE_MASK)
/*
* Transmit Clock Control Register -- REG_ESAI_TCCR 0xD8
--
1.7.9.5
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
