On Thu, 2014-12-11 at 17:00 +1100, Gavin Shan wrote: > The callback (ppc_md.pci_probe_mode()) is used to determine if the > child PCI devices of the indicated PCI bus should be probed from > device-tree or hardware. On PowerNV platform, we always expect > probing PCI devices from hardware, which is PowerPC PCI core's > default behaviour. Also, the callback had some delay implemented > based on PHB's device node property "reset-clear-timestamp", which > wasn't exported from skiboot. So we don't need this function and > it's safe to remove it.
Yes all that timestamp stuff was related to the old OPAL which is long gone. Cheers, Ben. > Signed-off-by: Gavin Shan <[email protected]> > --- > arch/powerpc/platforms/powernv/pci.c | 30 ------------------------------ > 1 file changed, 30 deletions(-) > > diff --git a/arch/powerpc/platforms/powernv/pci.c > b/arch/powerpc/platforms/powernv/pci.c > index 4b20f2c..d346df2 100644 > --- a/arch/powerpc/platforms/powernv/pci.c > +++ b/arch/powerpc/platforms/powernv/pci.c > @@ -782,35 +782,6 @@ static void pnv_p7ioc_rc_quirk(struct pci_dev *dev) > } > DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_IBM, 0x3b9, pnv_p7ioc_rc_quirk); > > -static int pnv_pci_probe_mode(struct pci_bus *bus) > -{ > - struct pci_controller *hose = pci_bus_to_host(bus); > - const __be64 *tstamp; > - u64 now, target; > - > - > - /* We hijack this as a way to ensure we have waited long > - * enough since the reset was lifted on the PCI bus > - */ > - if (bus != hose->bus) > - return PCI_PROBE_NORMAL; > - tstamp = of_get_property(hose->dn, "reset-clear-timestamp", NULL); > - if (!tstamp || !*tstamp) > - return PCI_PROBE_NORMAL; > - > - now = mftb() / tb_ticks_per_usec; > - target = (be64_to_cpup(tstamp) / tb_ticks_per_usec) > - + PCI_RESET_DELAY_US; > - > - pr_devel("pci %04d: Reset target: 0x%llx now: 0x%llx\n", > - hose->global_number, target, now); > - > - if (now < target) > - msleep((target - now + 999) / 1000); > - > - return PCI_PROBE_NORMAL; > -} > - > void __init pnv_pci_init(void) > { > struct device_node *np; > @@ -857,7 +828,6 @@ void __init pnv_pci_init(void) > ppc_md.tce_build_rm = pnv_tce_build_rm; > ppc_md.tce_free_rm = pnv_tce_free_rm; > ppc_md.tce_get = pnv_tce_get; > - ppc_md.pci_probe_mode = pnv_pci_probe_mode; > set_pci_dma_ops(&dma_iommu_ops); > > /* Configure MSIs */ _______________________________________________ Linuxppc-dev mailing list [email protected] https://lists.ozlabs.org/listinfo/linuxppc-dev
