Hi Ryan, Excerpts from Ryan Grimm's message of 2015-01-16 09:27:15 +1100: > reset_image_select identifies whether a PERST will cause the image to be
s/reset_image_select/load_image_on_perst/ > +What: /sys/class/cxl/<card>/load_image_on_perst > +Date: December 2014 > +Contact: linuxppc-dev@lists.ozlabs.org > +Description: read/write > + Value of "none" means PERST will not cause image to be loaded > + to the card. A power cycle is required to load the image. git am spotted some whitespace at the end of this line. > +int cxl_update_image_control(struct cxl *adapter) Would you be able to pull this function out into a separate patch (can be first in the series so everything still compiles after each patch) along with the change to the image_state defaults from patch 3? It's a fix that I think would be good to be backported to stable, which will be simpler if it's in a separate patch. Otherwise, looks good :) Acked-by: Ian Munsie <imun...@au1.ibm.com> _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev