On Wed, 2015-04-08 at 18:46 +0800, Shengzhou Liu wrote: > T1024RDB is a Freescale Reference Design Board that hosts the T1024 SoC. > > T1024RDB board Overview > ----------------------- > - Processor: T1024 SoC integrating two 64-bit e5500 cores up to 1.4GHz > - Memory: 64-bit 4GB DDR3L UDIMM with ECC and interleaving support > - Ethernet: two 1G RGMII ports, one 2.5G SGMII port and one 10G Base-T port > - Accelerator: DPAA components consist of FMan, BMan, QMan, PME, DCE and SEC > - SerDes: 4 lanes up to 10.3125GHz > - IFC: 128MB NOR Flash, 1GB NAND Flash and CPLD system controlling > - PCIe: one PCIe slot and two Mini-PCIe connectors on-board > - USB: two Type-A USB2.0 ports with internal PHY > - eSDHC: one SDHC/MMC/eMMC connector > - eSPI: one 64MB N25Q512 SPI flash > - QE-TDM: support TDM Riser card > - 32-bit RISC controller for flexible support of the communications > peripherals > - Serial DMA channel for receive and transmit on all serial channels > - Two universal communication controllers, supporting TDM, HDLC, and UART > - I2C: four I2C controllers > - UART: two UART on board > - Deep sleep power management support > > Signed-off-by: Shengzhou Liu <shengzhou....@freescale.com> > --- > v2: Integrated scott's comments.
My comment was to add a binding for the QE TDM stuff, not to remove it. -Scott _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev