On Thu, Mar 26, 2015 at 05:16:17PM +0800, ying.zh...@freescale.com wrote: > @@ -96,37 +102,63 @@ static void __init mpc85xx_rdb_setup_arch(void) > #ifdef CONFIG_QUICC_ENGINE > mpc85xx_qe_init(); > mpc85xx_qe_par_io_init(); > -#if defined(CONFIG_UCC_GETH) || defined(CONFIG_SERIAL_QE) > - if (machine_is(p1025_rdb)) { > - struct device_node *np; > - > - struct ccsr_guts __iomem *guts; > - > - np = of_find_node_by_name(NULL, "global-utilities"); > - if (np) { > - guts = of_iomap(np, 0); > - if (!guts) { > - > - pr_err("mpc85xx-rdb: could not map global > utilities register\n"); > +#ifdef CONFIG_SPI_FSL_SPI > + for_each_node_by_name(qe_spi, "spi") > + par_io_of_config(qe_spi);
Why are you assuming that any node named "spi" is a QE SPI? > +#endif /* CONFIG_SPI_FSL_SPI */ > > - } else { > - /* P1025 has pins muxed for QE and other functions. To > - * enable QE UEC mode, we need to set bit QE0 for UCC1 > - * in Eth mode, QE0 and QE3 for UCC5 in Eth mode, QE9 > - * and QE12 for QE MII management singals in PMUXCR > - * register. > - */ > + np = of_find_node_by_name(NULL, "global-utilities"); > + if (np) { > + guts = of_iomap(np, 0); > + if (!guts) > + pr_err("mpc85xx-rdb: could not map global %s\n", > + "utilities register"); > + else { Don't put a bunch of code in the else of an error check. Factor this out to its own function and return early if you don't find what you're looking for. -Scott _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev