Signed-off-by: Madalin Bucur <madalin.bu...@freescale.com>
---
 arch/powerpc/boot/dts/fsl/qoriq-fman3l-0.dtsi | 94 +++++++++++++++++++++++++++
 arch/powerpc/boot/dts/fsl/t1023si-post.dtsi   | 27 ++++++++
 arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi    |  6 ++
 arch/powerpc/boot/dts/t1023rdb.dts            | 40 ++++++++++++
 4 files changed, 167 insertions(+)
 create mode 100644 arch/powerpc/boot/dts/fsl/qoriq-fman3l-0.dtsi

diff --git a/arch/powerpc/boot/dts/fsl/qoriq-fman3l-0.dtsi 
b/arch/powerpc/boot/dts/fsl/qoriq-fman3l-0.dtsi
new file mode 100644
index 0000000..8e9e272
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/qoriq-fman3l-0.dtsi
@@ -0,0 +1,94 @@
+/*
+ * QorIQ FMan v3 device tree stub [ controller @ offset 0x400000 ]
+ *
+ * Copyright 2012 - 2015 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ *     * Redistributions of source code must retain the above copyright
+ *      notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *      notice, this list of conditions and the following disclaimer in the
+ *      documentation and/or other materials provided with the distribution.
+ *     * Neither the name of Freescale Semiconductor nor the
+ *      names of its contributors may be used to endorse or promote products
+ *      derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 
THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+fman0: fman@400000 {
+       #address-cells = <1>;
+       #size-cells = <1>;
+       cell-index = <0>;
+       compatible = "fsl,fman";
+       ranges = <0 0x400000 0x100000>;
+       reg = <0x400000 0x100000>;
+       interrupts = <96 2 0 0>, <16 2 1 1>;
+       clocks = <&fm0clk>;
+       clock-names = "fm0clk";
+       fsl,qman-channel-range = <0x800 0x10>;
+
+       muram@0 {
+               compatible = "fsl,fman-muram";
+               reg = <0x0 0x30000>;
+       };
+
+       fman0_oh_0x2: port@82000 {
+               cell-index = <0x2>;
+               compatible = "fsl,fman-v3-port-oh";
+               reg = <0x82000 0x1000>;
+       };
+
+       fman0_oh_0x3: port@83000 {
+               cell-index = <0x3>;
+               compatible = "fsl,fman-v3-port-oh";
+               reg = <0x83000 0x1000>;
+       };
+
+       fman0_oh_0x4: port@84000 {
+               cell-index = <0x4>;
+               compatible = "fsl,fman-v3-port-oh";
+               reg = <0x84000 0x1000>;
+       };
+
+       fman0_oh_0x5: port@85000 {
+               cell-index = <0x5>;
+               compatible = "fsl,fman-v3-port-oh";
+               reg = <0x85000 0x1000>;
+       };
+
+       mdio0: mdio@fc000 {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+               reg = <0xfc000 0x1000>;
+       };
+
+       xmdio0: mdio@fd000 {
+               #address-cells = <1>;
+               #size-cells = <0>;
+               compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
+               reg = <0xfd000 0x1000>;
+       };
+
+       ptp_timer0: ptp-timer@fe000 {
+               compatible = "fsl,fman-ptp-timer";
+               reg = <0xfe000 0x1000>;
+       };
+};
diff --git a/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi 
b/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
index 48c1690..a6eb7ae 100644
--- a/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t1023si-post.dtsi
@@ -344,6 +344,14 @@
                reg = <0xe0000 0xe00>;
                fsl,has-rstcr;
                fsl,liodn-bits = <12>;
+
+               fm0clk: fm0-clk-mux {
+                       #clock-cells = <0>;
+                       compatible = "fsl,fman-clk-mux";
+                       clocks = <&pll0 1>;
+                       clock-names = "pll0-div2";
+                       clock-output-names = "fm0-clk";
+               };
        };
 
 /include/ "qoriq-clockgen2.dtsi"
@@ -436,4 +444,23 @@ sata@220000 {
 /include/ "qoriq-sec5.0-0.dtsi"
 /include/ "qoriq-qman3.dtsi"
 /include/ "qoriq-bman1.dtsi"
+
+/include/ "qoriq-fman3l-0.dtsi"
+/include/ "qoriq-fman3-0-1g-0.dtsi"
+/include/ "qoriq-fman3-0-1g-1.dtsi"
+/include/ "qoriq-fman3-0-1g-2.dtsi"
+/include/ "qoriq-fman3-0-1g-3.dtsi"
+       fman@400000 {
+               enet0: ethernet@e0000 {
+               };
+
+               enet1: ethernet@e2000 {
+               };
+
+               enet2: ethernet@e4000 {
+               };
+
+               enet3: ethernet@e6000 {
+               };
+       };
 };
diff --git a/arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi 
b/arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi
index 1f1a9f8..3e1528a 100644
--- a/arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi
+++ b/arch/powerpc/boot/dts/fsl/t102xsi-pre.dtsi
@@ -59,6 +59,12 @@
                sdhc = &sdhc;
 
                crypto = &crypto;
+
+               fman0 = &fman0;
+               ethernet0 = &enet0;
+               ethernet1 = &enet1;
+               ethernet2 = &enet2;
+               ethernet3 = &enet3;
        };
 
        cpus {
diff --git a/arch/powerpc/boot/dts/t1023rdb.dts 
b/arch/powerpc/boot/dts/t1023rdb.dts
index 571e070..146d30d 100644
--- a/arch/powerpc/boot/dts/t1023rdb.dts
+++ b/arch/powerpc/boot/dts/t1023rdb.dts
@@ -128,6 +128,46 @@
                i2c@118100 {
                };
 
+               fman@400000 {
+                       fm1mac1: ethernet@e0000 {
+                               phy-handle = <&sgmii_rtk_phy2>;
+                               phy-connection-type = "sgmii";
+                               sleep = <&rcpm 0x80000000>;
+                       };
+
+                       fm1mac2: ethernet@e2000 {
+                               sleep = <&rcpm 0x40000000>;
+                       };
+
+                       fm1mac3: ethernet@e4000 {
+                               phy-handle = <&sgmii_aqr_phy3>;
+                               phy-connection-type = "sgmii-2500";
+                               sleep = <&rcpm 0x20000000>;
+                       };
+
+                       fm1mac4: ethernet@e6000 {
+                               phy-handle = <&rgmii_rtk_phy1>;
+                               phy-connection-type = "rgmii";
+                               sleep = <&rcpm 0x10000000>;
+                       };
+
+
+                       mdio0: mdio@fc000 {
+                               rgmii_rtk_phy1: ethernet-phy@1 {
+                                       reg = <0x1>;
+                               };
+                               sgmii_rtk_phy2: ethernet-phy@3 {
+                                       reg = <0x3>;
+                               };
+                       };
+
+                       xmdio0: mdio@fd000 {
+                               sgmii_aqr_phy3: ethernet-phy@2 {
+                                       compatible = 
"ethernet-phy-ieee802.3-c45";
+                                       reg = <0x2>;
+                               };
+                       };
+               };
        };
 
        pci0: pcie@ffe240000 {
-- 
1.7.11.7

_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev

Reply via email to