Regards, Igal Liberman
> -----Original Message----- > From: Shaohui Xie [mailto:shaohui....@nxp.com] > Sent: Tuesday, December 22, 2015 8:27 AM > To: Liberman Igal-B31950 <igal.liber...@freescale.com>; > devicet...@vger.kernel.org; linuxppc-dev@lists.ozlabs.org > Cc: Wood Scott-B07421 <scottw...@freescale.com>; Bucur Madalin- > Cristian-B32716 <madalin.bu...@freescale.com>; Xie Shaohui-B21989 > <shaohui....@freescale.com> > Subject: RE: [PATCH] powerpc/mpc85xx: Add pcsphy nodes to FManV3 > device tree > > > @@ -55,6 +55,7 @@ fman@400000 { > > reg = <0xe0000 0x1000>; > > fsl,fman-ports = <&fman0_rx_0x08 &fman0_tx_0x28>; > > ptp-timer = <&ptp_timer0>; > > + pcsphy-handle = <&pcsphy0>; > > }; > > > > mdio@e1000 { > > @@ -62,5 +63,9 @@ fman@400000 { > > #size-cells = <0>; > > compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; > > reg = <0xe1000 0x1000>; > > + > > + pcsphy0: ethernet-phy@0 { > > + reg = <0x0>; > > + }; > > }; > > }; > > [S.H] snip. > > > mdio@e1000 { > > @@ -58,5 +59,9 @@ fman@400000 { > > #size-cells = <0>; > > compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio"; > > reg = <0xe1000 0x1000>; > > + > > + pcsphy0: pcs-phy@0 { > > + reg = <0x0>; > > + }; > > }; > [S.H] Should use 'ethernet-phy', same as above. > I'll resubmit and fix this (pcs-phy ---> ethernet-phy). Thank you, Igal > Thanks, > Shaohui _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev
