Quite often drivers set only "write" permission assuming that this
includes "read" permission as well and this works on plenty platforms.
However IODA2 is strict about this and produces an EEH when "read"
permission is not and reading happens.
This adds a workaround in IODA code to always add the "read" bit when
the "write" bit is set.
Cc: Benjamin Herrenschmidt <b...@kernel.crashing.org>
Signed-off-by: Alexey Kardashevskiy <a...@ozlabs.ru>
---
Ben, what was the driver which did not set "read" and caused EEH?
---
arch/powerpc/platforms/powernv/pci.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/powerpc/platforms/powernv/pci.c
b/arch/powerpc/platforms/powernv/pci.c
index f2dd772..c7dcae5 100644
--- a/arch/powerpc/platforms/powernv/pci.c
+++ b/arch/powerpc/platforms/powernv/pci.c
@@ -601,6 +601,9 @@ int pnv_tce_build(struct iommu_table *tbl, long index, long
npages,
u64 rpn = __pa(uaddr) >> tbl->it_page_shift;
long i;
+ if (proto_tce & TCE_PCI_WRITE)
+ proto_tce |= TCE_PCI_READ;
+
for (i = 0; i < npages; i++) {
unsigned long newtce = proto_tce |
((rpn + i) << tbl->it_page_shift);
@@ -622,6 +625,9 @@ int pnv_tce_xchg(struct iommu_table *tbl, long index,
BUG_ON(*hpa & ~IOMMU_PAGE_MASK(tbl));
+ if (newtce & TCE_PCI_WRITE)
+ newtce |= TCE_PCI_READ;
+
oldtce = xchg(pnv_tce(tbl, idx), cpu_to_be64(newtce));
*hpa = be64_to_cpu(oldtce) & ~(TCE_PCI_READ | TCE_PCI_WRITE);
*direction = iommu_tce_direction(oldtce);
--
2.5.0.rc3
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
