On Wed, 2016-01-27 at 06:47 +0000, Zhiqiang Hou wrote: > Hi Herring and Kumar and Ian, > > Can you help to apply this patch? > > Thanks, > Zhiqiang
Can you check whether a patch has already been applied before pinging people about it? -Scott > > > -----Original Message----- > > From: Zhiqiang Hou [mailto:zhiqiang....@nxp.com] > > Sent: 2015年12月22日 17:28 > > To: Zhiqiang Hou <zhiqiang....@freescale.com>; > > linuxppc-dev@lists.ozlabs.org; > > Scott Wood <scottw...@freescale.com>; ga...@kernel.crashing.org; > > b...@kernel.crashing.org; pau...@samba.org; m...@ellerman.id.au; > > devicet...@vger.kernel.org; robh...@kernel.org; pawel.m...@arm.com; > > mark.rutl...@arm.com; ijc+devicet...@hellion.org.uk; Harninder Rai > > <harninder....@freescale.com> > > Cc: Lian M.H. <minghuan.l...@freescale.com>; Hu Vincent > > <mingkai...@freescale.com>; Hou Zhiqiang <b48...@freescale.com> > > Subject: RE: [PATCH V4 1/2] powerpc/fsl: Add PCI node in device tree of > > bsc9132qds > > > > Hi Rob, > > > > Could you please take this patch into account? > > > > Thanks, > > Zhiqiang > > > > > -----Original Message----- > > > From: Zhiqiang Hou [mailto:zhiqiang....@freescale.com] > > > Sent: 2015年11月5日 11:16 > > > To: linuxppc-dev@lists.ozlabs.org; Scott Wood; > > > ga...@kernel.crashing.org; b...@kernel.crashing.org; pau...@samba.org; > > > m...@ellerman.id.au; devicet...@vger.kernel.org; robh...@kernel.org; > > > pawel.m...@arm.com; mark.rutl...@arm.com; > > > ijc+devicet...@hellion.org.uk; Harninder Rai > > > Cc: Minghuan Lian; Mingkai Hu; Zhiqiang Hou > > > Subject: [PATCH V4 1/2] powerpc/fsl: Add PCI node in device tree of > > > bsc9132qds > > > > > > From: Harninder Rai <harninder....@freescale.com> > > > > > > Signed-off-by: Harninder Rai <harninder....@freescale.com> > > > Signed-off-by: Minghuan Lian <minghuan.l...@freescale.com> > > > Signed-off-by: Hou Zhiqiang <b48...@freescale.com> > > > --- > > > V4: V3: > > > - Remove gerrit stuff. > > > V2: > > > - Remove property clock-frequency. > > > > > > arch/powerpc/boot/dts/bsc9132qds.dts | 15 ++++++++++++++ > > > arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi | 28 > > > +++++++++++++++++++++++++++ > > > +++++++++++++++++++++++++++ arch/powerpc/boot/dts/fsl/bsc9132si-pre.dt > > > +++++++++++++++++++++++++++ si > > > > 1 + > > > 3 files changed, 44 insertions(+) > > > > > > diff --git a/arch/powerpc/boot/dts/bsc9132qds.dts > > > b/arch/powerpc/boot/dts/bsc9132qds.dts > > > index 6cab106..940d719 100644 > > > --- a/arch/powerpc/boot/dts/bsc9132qds.dts > > > +++ b/arch/powerpc/boot/dts/bsc9132qds.dts > > > @@ -29,6 +29,21 @@ > > > soc: soc@ff700000 { > > > ranges = <0x0 0x0 0xff700000 0x100000>; }; > > > + > > > +pci0: pcie@ff70a000 { > > > +reg = <0 0xff70a000 0 0x1000>; > > > +ranges = <0x2000000 0x0 0x90000000 0 0x90000000 0x0 > > > 0x20000000 > > > + 0x1000000 0x0 0x00000000 0 0xc0010000 0x0 0x10000>; > > > +pcie@0 { > > > +ranges = <0x2000000 0x0 0x90000000 > > > + 0x2000000 0x0 0x90000000 > > > + 0x0 0x20000000 > > > + > > > + 0x1000000 0x0 0x0 > > > + 0x1000000 0x0 0x0 > > > + 0x0 0x100000>; > > > +}; > > > +}; > > > }; > > > > > > /include/ "bsc9132qds.dtsi" > > > diff --git a/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi > > > b/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi > > > index c723071..b5f0715 100644 > > > --- a/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi > > > +++ b/arch/powerpc/boot/dts/fsl/bsc9132si-post.dtsi > > > @@ -40,6 +40,34 @@ > > > interrupts = <16 2 0 0 20 2 0 0>; > > > }; > > > > > > +/* controller at 0xa000 */ > > > +&pci0 { > > > +compatible = "fsl,bsc9132-pcie", "fsl,qoriq-pcie-v2.2"; device_type = > > > +"pci"; #size-cells = <2>; #address-cells = <3>; bus-range = <0 255>; > > > +interrupts = <16 2 0 0>; > > > + > > > +pcie@0 { > > > +reg = <0 0 0 0 0>; > > > +#interrupt-cells = <1>; > > > +#size-cells = <2>; > > > +#address-cells = <3>; > > > +device_type = "pci"; > > > +interrupts = <16 2 0 0>; > > > +interrupt-map-mask = <0xf800 0 0 7>; > > > + > > > +interrupt-map = < > > > +/* IDSEL 0x0 */ > > > +0000 0x0 0x0 0x1 &mpic 0x0 0x2 0x0 0x0 > > > +0000 0x0 0x0 0x2 &mpic 0x1 0x2 0x0 0x0 > > > +0000 0x0 0x0 0x3 &mpic 0x2 0x2 0x0 0x0 > > > +0000 0x0 0x0 0x4 &mpic 0x3 0x2 0x0 0x0 > > > +>; > > > +}; > > > +}; > > > + > > > &soc { > > > #address-cells = <1>; > > > #size-cells = <1>; > > > diff --git a/arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi > > > b/arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi > > > index 301a9db..90f7949 100644 > > > --- a/arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi > > > +++ b/arch/powerpc/boot/dts/fsl/bsc9132si-pre.dtsi > > > @@ -45,6 +45,7 @@ > > > serial0 = &serial0; > > > ethernet0 = &enet0; > > > ethernet1 = &enet1; > > > +pci0 = &pci0; > > > }; > > > > > > cpus { > > > -- > > > 2.1.0.27.g96db324 > > _______________________________________________ > Linuxppc-dev mailing list > Linuxppc-dev@lists.ozlabs.org > https://lists.ozlabs.org/listinfo/linuxppc-dev _______________________________________________ Linuxppc-dev mailing list Linuxppc-dev@lists.ozlabs.org https://lists.ozlabs.org/listinfo/linuxppc-dev