Hello,
We have HW debuggers ; Windriver ICE and BDI2000 , but in our specific scenario
the system is up
and running and we cannot be breakpoint intrusive, other parts of the system
would be affected ( and our own blade ).
No, what we would like to do is that when a specific condition is met a
backtrace printout
is performed and after that the system runs as designed.
:
[Existing code]
:
:
if ( some_variable == my_condition )
{
print_out_backtrace();
}
:
:
[Existing code]
:
:
We have implemented "forced" kernel ooops:es in "print_out_backtrace();" but we
would like to
have controlled backtraces ;-))
This is in Kernel space on a ppc8270.
Cheers // Matias
-----Original Message-----
From: KokHow Teh [mailto:[EMAIL PROTECTED]
Sent: den 1 september 2006 12:13
To: Matias Sundman (AS/EAB)
Cc: [email protected]
Subject: Re: Backtrace
Hi;
Is using hardware/software breakpoint with a hardware debugger what
you are looking for?
Regards,
Teh
"Matias Sundman \(AS/EAB\)" <[EMAIL PROTECTED]>@ozlabs.org on
09/01/2006 02:48:43 PM
Sent by: [EMAIL PROTECTED]
To: <[email protected]>
cc:
Subject: Backtrace
Comrades,
I would like to do a backtrace in kernel space similar to an oops but then
continue the code flow as before i.e. without a crash.
If someone has done anything similar, help and/or tips would be much
appreciated!
Cheers //
Matias Sundman
Senior Sw Designer
Ericssonl
IS Ethernet Switch, DIPN
Ericsson AB
Box 1505 Office: +46 8 719 86 83
SE-125 25 ÄLVSJÖ ECN: 850 98683
SWEDEN Mobile: +46 70 267 2405
Visiting address: E-mail: [EMAIL PROTECTED]
Armborstvägen 14 Web: http://www.ericsson.com
Älvsjö, STOCKHOLM
_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
_______________________________________________
Linuxppc-embedded mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
