Re: Ethernet driver for Linux kernel 2.6 running on ML403

[David H. Lynch Jr.]

Grant Likely wrote: Avast! After getting quizzed on IRC about this off-the-cuff comment, I should probably clarify. Since the Xilinx IP could be wired up to a ublaze core or an off-chip processor, the drivers still need to use a platform bus attachment to keep it all cross platform. So, replace above comment with the following: Populating the platform device with static code during initialization is sooo last year. Time to hack device trees to populate it instead.     So I got another X V4 board. I hacked in the Platform device stuff from you ml403 code with changes needed for my hardware.     and my brain is slowly begining to actually grasp  what is going on - I am begining to grasp the platform devices big picture (over a mountain through a spyglass in the fog)     Where do I begin with Device Trees ?     The vague Picture I have is the have something to do with some datastructure that Mac's typically create at or prior to boot. And that for embedded systems we are building them     externally compiling them and then attaching the compiled device tree to our project.     I got a Xilinv V4 device currently with a Pic, UartLite, TEMAC, Flash and Keyhole (pseuodo serial host interface). Of those it is only certain that the flash will always be there.     We have bit images with Keyhole only, Uartlite only TEMAC only, Sometimes we have a Pic sometimes not. I was trying to get to the point were I could dynamically add what was there     to Platform devices during initialization.     If Device trees are static, then do they even apply to what I have to deal with ?     Please pardon my ignorance. -- Dave Lynch DLA Systems Software Development: Embedded Linux 717.627.3770 [EMAIL PROTECTED] http://www.dlasys.net fax: 1.253.369.9244 Cell: 1.717.587.7774 Over 25 years' experience in platforms, languages, and technologies too numerous to list. "Any intelligent fool can make things bigger and more complex... It takes a touch of genius - and a lot of courage to move in the opposite direction." Albert Einstein

_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded